ProForm 600 Zlt Treadmill Uk Manual - Page 7

1. Make sure that the power cord is unplugged. 1 Remove the M10 Nut (19), the M10 x 50mm Bolt (31), and the shipping bracket (A) from the Base (95). Remove the shipping bracket from the other side of the treadmill. Discard the shipping brackets. Save the Nuts and the Bolts for steps 3 and 6. A 95 19 31 2. With the help of a second person, carefully tip the treadmill onto its left side. Partially fold the Frame (56) so that the treadmill is more stable; do not fully fold the Frame yet. Cut the shipping tie securing the Upright Wire (88) to the Base (95). Next, locate a plastic tie in the indicated hole in the Base, and use the tie to pull the Upright Wire out of the hole. Attach two Base Feet (92) to the Base (95) in the locations shown with two M4.2 x 25mm Tek Screws (3) and two Base Foot Spacers (94). Attach the other two Base Feet (92) with only two M4.2 x 25mm Tek Screws (3). 2 56 88 95 94 92 3 Hole 92 3 92 3 92 94 3 7