ProForm 665 E Treadmill English Manual - Page 8

4. Hold a Bolt Spacer (80) inside the lower end of the Right Upright (78). Insert a 3/8" x 4" Bolt (6) 4 with a 3/8" Star Washer (9) into the Right Upright and the Bolt Spacer. Repeat this step 78 with a second Bolt Spacer (80), 3/8" x 4" Bolt (6), and 3/8" Star Washer (9). Hold the Right Upright (78) against the Right Upright Spacer (79). Be careful not to pinch the Upright Wire (38). Partially tighten the 3/8" x 4" Bolts (6); do not fully tighten the Bolts yet. Press a Base Endcap (77) into the Base (83). 83 6 9 38 80 80 77 79 5. With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the Frame (56) so the treadmill is more stable; do not fully fold the Frame yet. Remove and discard the two indicated bolts (A) and the shipping bracket (B). Attach a Base Pad (81) to the Base (83) in the location shown with a 1" Tek Screw (2) and a Base Pad Spacer (13). Then, attach another Base Pad (81) with only a 1" Tek Screw (2). Remove the 3/8" Nut (8), the 3/8" x 2" Bolt (4), and the shipping bracket (C) from the Base (83). Attach a Wheel (84) with the Bolt and the Nut that you just removed. Do not overtighten the Nut; the Wheel must turn freely. Discard the shipping bracket. 5 A 81 2 83 B 56 4 13 84 2 81 C 8 8