ProForm 725 Fp English Manual - Page 12
How To Use Personal Trainer Programs
View all ProForm 725 Fp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
HOW TO USE PERSONAL TRAINER PROGRAMS 1 Insert the key into the console. See HOW TO TURN ON THE POWER on 10. The program will continue in this way until the TIME/INCLINE display counts down to zero. The walking belt will then slow to a stop. 2 Select one of the personal trainer programs. When the key is inserted, the manual mode will be selected. To select one of the personal trainer programs, press the PROGRAM button repeatedly until one of the four personal trainer program indicators lights. The profiles on the console show how the speed and incline of the treadmill will change during the personal trainer programs. The numbers beside the profiles show the maximum speed and incline settings for the programs. For example, the upper left profile shows that the treadmill will reach a maximum speed of 4.5 mph and a maximum incline of 5% during the first program. The TIME/INCLINE display will show how long the selected program will last. If the speed or incline setting for the current period is too high or too low, you can manually override the setting by pressing the SPEED or INCLINE buttons on the console. However, when the next period begins, the treadmill will adjust to the next speed and incline settings for the program. To stop the program, press the STOP button. The TIME/INCLINE display will begin to flash. To restart the program, press the START button or the SPEED v button. To end the program, press the STOP button, remove the key, and then reinsert the key. 4 Follow your progress with the LED track and the four displays. Refer to step 5 on page 10. 5 Measure your heart rate, if desired. See step 6 on page 11. 3 6 Press the START button or the SPEED v button to start the program. When the program is completed, remove the key from the console. A moment after the button is pressed, the treadmill will automatically adjust to the first speed and incline settings for the program. Hold the handrails and begin walking. Each program is divided into several time periods of different lengths. One speed setting and one incline setting are programmed for each period. When only three seconds remain in the first period of the program, a series of tones will sound and the treadmill will automatically adjust to the speed and incline settings for the second period. When the program has ended, make sure that the treadmill is at the lowest incline level. Next, remove the key from the console and put it in a secure place. Note: If the displays and indicators on the console remain lit after the key is removed, the console is in the "demo" mode. Refer to page 18 and turn off the demo mode. When you are finished using the treadmill, move the on/off switch near the power cord to the off position. 12