ProForm 725 Fp English Manual - Page 6
Assembly - belt
View all ProForm 725 Fp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ASSEMBLY Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench and your own phillips screwdriver and rubber mallet . Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner. 1. With the help of a second person, carefully raise the 1 Uprights (82) until the treadmill is in the position shown. 82 2. Remove the Lock Knob (110) from the Lock Pin (114). Make sure that the Lock Pin Collar (112) and the Spring (111) are on the Lock Pin as shown. Insert the Lock Pin into the Latch Bracket (77). Tighten the Lock Knob (110) onto the Lock Pin (114). 2 110 77 111 112 114 3. Refer to drawing 3a. Press a Handrail Insert (102) into the lower end of a Handrail (85). Hold an Extension Leg 3a (103) against the lower end of the Handrail. Insert a Handrail Bolt (78) with a Handrail Washer (36) into the Extension Leg and thread the Handrail Bolt three or 85 four turns into the Handrail. Notice the angle of the Handrail and insert the Handrail Bolt and Washer at the 102 same angle (see drawing 3b). 3b 103 85 Attach a Handrail Insert (102) and an Extension Leg (103) to the other Handrail (85) in the same way. 103 36 36 78 78 6