ProForm 740 Ekg Bike Uk Manual - Page 5
mm Button Screws 45 and three M8 Split Washers
View all ProForm 740 Ekg Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
3. Whilst another person holds the Upright (13) in the position shown, connect the Upper Wire Harness (36) 3 to the Lower Wire Harness (55). Carefully pull the excess Upper Wire Harness (36) out of the top of the Upright (13), and slide the Upright onto the Frame. Be careful to avoid pinching the Wire Harnesses. Next, attach the Upright with three M8 x 25mm Button Screws (45) and three M8 Split Washers (41). 41 45 Be careful to avoid pinching the wire harnesses whilst attaching the upright. 13 41 45 36 55 1 4. Identify the Handlebar Handle (9), which has a longer threaded shaft than the Seat Bracket Handle (not 4 shown). Attach the Handlebar (15) to the Upright (13) with the Handlebar Bracket (58) and the Handlebar Handle (9). Note: The Handlebar Handle functions like a spanner. Turn the Handle clockwise, pull it away from the Upright, turn it counterclockwise, push it toward the Upright, and then turn it clockwise again. Repeat this process until the Handle is tight. 15 58 13 9 5