ProForm 905 Cst Treadmill English Manual - Page 11
Screws, and then tighten them.
View all ProForm 905 Cst Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
6. Set a Handrail (84) on the Right Upright (90). Make sure that the Upright Wire (81) is not 6 28 pinched. Attach the Handrail (84) with two 5/16" x 2 1/4" Screws (28) and two 5/16" Star Washers (11); start both Screws, and then tighten them. Attach the other Handrail (not shown) in the same way. Note: There is no wire on the left side. Then, remove the two indicated screws (E) from both Handrails (84) (only one side is shown). Discard the screws. 11 E 84 81 90 7. Set the console assembly (F) face down on a soft surface to avoid scratching the console 7 assembly. Remove and save the four 1/4" x 1/2" Screws (2). Identify the Left Tray (36). Attach the Left Tray with four #8 x 1/2" Screws (1); start all four Screws, and then tighten them. Be careful not to overtighten the Screws. 2 Attach the Right Tray (27) in the same way. 1 1 1 36 1 F 27 2 11