ProForm 905 Cst Treadmill English Manual - Page 15

14. Firmly tighten the four 3/8" x 2 3/8" Screws (7), the two 3/8" x 1 3/4" Screws (62), and the 14 two 3/8" x 1 1/4" Screws (51). Next, set the Left Inner Base Cover (97) onto the lower end of the Left Upright (89). Then, slide the Left Base Cover (82) downward and press it onto the Left Inner Base Cover. Next, set the Right Inner Base Cover (96) onto the lower end of the Right Upright (90). Then, slide the Right Base Cover (83) downward and press it onto the Right Inner Base Cover. 83 62 51 90 7 89 82 97 51 7 62 96 15. Attach the Tablet Holder (100) to the console assembly (F) with four #8 x 1/2" Machine Screws 15 (99); start all four Machine Screws, and then 100 tighten them. Do not overtighten the Machine Screws. 99 99 F 16. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see pages 28 and 29). Note: Extra hardware may be included. 15