ProForm 905 Cst Treadmill English Manual - Page 12
If You Do Not Connect
View all ProForm 905 Cst Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
8. With the help of a second person, hold the console assembly (F) near the Right Handrail (84) 8 and the Left Handrail (not shown). F See the inset drawing. Connect the Upright Wire (81) to the console wire (G). The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Then, remove the wire tie (A) from the Upright Wire. G 81 84 A 9. Set the console assembly (F) on the Handrails (84). Be careful not to pinch any wires. Insert 9 F the excess Upright Wire (81) into the Right Upright (90). Attach the console assembly (F) with the four 1/4" x 1/2" Screws (2) that you removed in step 7 and four 1/4" Star Washers (26); do not tighten the Screws yet. 84 81 26 2 90 G 81 84 26 2 12