ProForm 960 Treadmill English Manual - Page 12

22. Remove the preassembled 3/8" x 2" Bolts (54) from one set of Adjustable Pulley Plates (23). 22 Wrap the Butterfly Cable (73) around a 3 1/2" Pulley (24). Attach the Pulley and a Cable Trap (25) between the top holes of the Adjustable Pulley Plates (23) with a 3/8" x 2" Bolt (54) and a 3/8" Nylon Locknut (50). Be sure that the Cable Trap is turned to hold the Cable in place. 23. Wrap the Butterfly Cable (73) around a "V"-Pulley 23 (27). Attach the Pulley and a Large Cable Trap (32) to the bracket on the Butterfly Upright (1) with a 3/8" x 2 1/2" Bolt (87) and a 3/8" Nylon Locknut (50). Be sure that the Cable Trap is turned to hold the Cable in place. 54 25 24 73 50 23 32 50 87 27 73 24. Attach the Butterfly Cable (73) to the Left Pivot Arm 24 (71) with a 5/16" x 2 1/4" Shoulder Bolt (79) and a 5/16" Nylon Jamnut (105). 1 73 79 71 105 25. Locate the Ab Cable (47). Insert the Ab Cable up through the Press Top Frame (9) and wrap it around a 3 1/2" Pulley (24). Slide a 3/8" Washer (48) and a 5/8" x 3/4" Bushing (66) onto a 3/8" x 3 1/4" Bolt (62). Slide the Bolt through the Press Top Frame (9) and the 3 1/2" Pulley (24). Secure another 5/8" x 3/4" Bushing and 3/8" Washer to the Bolt with a 3/8" Nylon Locknut (50). 25 24 62 48 47 66 9 48 50 12