ProForm 960 Treadmill English Manual - Page 6
Frame Assembly
View all ProForm 960 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
FRAME ASSEMBLY 1 50 1. Before you begin this step, make sure that you have read all of the information on page 5. This brief introduction will save you much 6 more time than it takes to read it. Locate and open the parts bags labeled "FRAME ASSEMBLY." 92 83 92 See the inset drawing. Insert two 1 1/2" x 2 1/2" Inner Caps (83) and two 3/8" x 2" Carriage Bolts (92) into the Butterfly Base (4). 2 Insert two 1 1/2" x 2 1/2" Inner Caps (83) into the indicated ends of the Butterfly Base (4) and the Press Base (6). Insert six 3/8" x 2" Carriage Bolts (92) into the Butterfly Base and the Press Base. Attach the Butterfly Base (4) to the Press Base (6) with two 3/8" x 3 1/4" Bolts (62), two 3/8" Washers (48), and two 3/8" Nylon Locknuts (50). 83 48 62 48 4 92 83 92 83 4 2. Attach the Butterfly Upright (1) to the indicated 3/8" x 2" Carriage Bolts (92) in the Butterfly Base (4) with two 3/8" Nylon Locknuts (50). Do not tighten the Nylon Locknuts yet. Be sure the Upright is attached in the position shown. Attach the Press Upright (2) to the indicated 3/8" x 2 1 2" Carriage Bolts (92) in the Press Base (6) with two 3/8" Nylon Locknuts (50). Do not tighten the Nylon Locknuts yet. Be sure the Upright is attached in the position shown. 50 50 50 50 6 3. Make sure the Plastic Bushing (52) is in the top of 3 the Butterfly Front Leg (3). Attach the Butterfly Front Leg (3) to the indicated 3/8" x 2" Carriage Bolts (92) in the Butterfly Base (4) with two 3/8" Nylon Locknuts (50). Do not tighten the Nylon Locknuts yet. Make sure that the Butterfly Front Leg is turned so that the welded "U"-bracket is on the side shown. 92 52 50 4 92 4 92 3 "U"-bracket 50 6