ProForm 960 Treadmill English Manual - Page 13

26. Wrap the Ab Cable (47) around a 3 1/2" Pulley (24). 26 Insert the Ab Cable down through the Press Top Frame (9). 24 62 Slide a 3/8" Washer (48) and a 5/8" x 3/4" Bushing (66) onto a 3/8" x 3 1/4" Bolt (62). Slide the Bolt through the Press Top Frame (9) and the 3 1/2" 48 Pulley (24). Secure another 5/8" x 3/4" Bushing and 3/8" Washer to the Bolt with a 3/8" Nylon Locknut 47 (50). 9 66 48 50 27. Remove the preassembled 3/8" x 2" Bolts (54) from 27 the other Adjustable Pulley Plates (23). Wrap the Ab Cable (47) around a 3 1/2" Pulley (24). Attach the Pulley and a Cable Trap (25) between the top holes in the Adjustable Pulley Plates (23) with a 3/8" x 2" Bolt (54) and a 3/8" Nylon Locknut (50). Be sure that the Cable Trap is turned to hold the Cable in place. 47 25 24 54 23 50 28. Wrap the Ab Cable (47) around a 3 1/2" Pulley (24). 28 Attach the Pulley to the rear bracket on the Press Top Frame (9) with a 3/8" x 2" Bolt (54) and a 3/8" Nylon Locknut (50). Be sure the Ab Cable is rout- ed in the direction shown. Wrap the Ab Cable (47) around another 3 1/2" Pulley (24). Attach the Pulley to the forward bracket on the Press Top Frame (9) with a 3/8" x 2" Bolt (54) and a 3/8" Nylon Locknut (50). Bracket 9 54 24 54 24 50 47 29. Wrap the Ab Cable (47) around a 4 1/2" Pulley (82) 29 and slide the Ab Cable through the hole in the Press Upright (2). Slide a 3/8" Washer (48) and a 5/8" x 1" Bushing (103) onto a 3/8" x 3 3/4" Bolt (102). Slide the Bolt through the Press Upright (2) and the 4 1/2" Pulley (82). Secure another 5/8" x 1" Bushing and 3/8" Washer to the Bolt with a 3/8" Nylon Locknut (50). 2 102 48 103 82 103 48 50 47 13