ProForm 960 Treadmill English Manual - Page 14

30. Locate the Weight Cable (72). Note that one end 30 of the Weight Cable has a bolt on it, and the other end has a ball on it. Lay the Weight Cable (72) inside the bracket on the Butterfly Base (4) in the manner shown. Attach a 3 1/2" Pulley (24) to the bracket with a 3/8" x 2" Bolt (54) and a 3/8" Nylon Locknut (50). Be sure the Weight Cable is in the groove of the Pulley. 3 24 54 4 72 50 Bracket 31. Wrap the Weight Cable (72) around a 3 1/2" Pulley 31 (24). Slide a 3/8" Washer (48) and a 5/8" x 1" 3 Bushing (103) onto a 3/8" x 3 3/4" Bolt (102). Slide the Bolt through the Butterfly Front Leg (3) and the Pulley. Secure another 5/8" x 1" Bushing and 3/8" Washer to the Bolt with a 3/8" Nylon Locknut (50). 50 48 48 102 24 72 103 32. Insert the Weight Cable (72) through the hole in the Leg Lever (41), up around a 3 1/2" Pulley (24), back through the hole in the Leg Lever, and through the upper hole in the Butterfly Front Leg (3). Attach the 3 1/2" Pulley (24) and two 5/8" x 1/2" Bushings (99) to the Leg Lever (41) with a 3/8" x 2 3/4" Bolt (89), two 3/8" Washers (48), and a 3/8" Nylon Locknut (50). 32 72 3 50 48 41 48 89 24 99 33. Lay the Weight Cable (72) under a 3 1/2" Pulley (24) as shown. Attach the 3 1/2" Pulley to the bracket on the Butterfly Base (4) with a 3/8" x 2" Bolt (54) and a 3/8" Nylon Locknut (50). 33 72 24 54 4 50 Bracket 14