ProForm Perspective 1.0 Lx Treadmill English Manual - Page 22
How To Use The Information Mode
View all ProForm Perspective 1.0 Lx Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
HOW TO OPERATE THE PERSONAL TELEVISION HOW TO USE THE INFORMATION MODE IMPORTANT: Before operating the television, you must connect an antenna, a 75 ohm CATV cable, or a VCR to the 75 ohm antenna terminal on the treadmill. See page 11 for instructions. Follow the steps below to operate the television. The console features an information mode that allows you to view treadmill usage information, select a system of measurement for the console, and turn on and turn off the demo mode. The information mode also allows you to adjust the settings of the television and to save channels into the television's memory. 1 Insert the key into the console. See HOW TO TURN ON THE POWER on page 14. 2 Turn on the television. When the key is inserted, the television will automatically turn on. If you have turned off the television, turn it on by pressing the On/Off button. 3 Press the Channel (CHAN.) buttons to select the desired channel. Follow the steps below to use the information mode. 1 Hold down the Stop button while inserting the key into the console. When the information mode is selected, the upper part of the right display will show the total number of miles or kilometers that the walking belt has moved, and the lower part of the display will show the total number of hours that the treadmill has been used. When the television is turned on, the screen will show the last channel that was selected. To select a different channel, press the Channel buttons. The selected channel number will appear on the screen for a few seconds. Note: The television is equipped with a channel memorizing function that allows you to go directly from the current channel to the next channel saved in memory. Before channels can be selected in this way, they must be saved in the television's memory. See HOW TO USE THE INFORMATION MODE at the right. 4 Press the Volume (VOL.) buttons to adjust the volume. When either Volume button is pressed, the volume level indicator will appear on the screen for a few seconds. To temporarily mute the sound, press the Mute button. Press the Mute button again to listen to the television. Note: To use earphones or headphones (not included), plug them into the headphone jack on the console. 5 When you are finished using the television, press the On/Off button. In addition, the right display will show the letter "E" for English miles or the letter "M" for metric kilometers. Press the Speed increase button to change the unit of measurement if desired. IMPORTANT: If the letter "d" appears in the right display, the "demo" mode is selected. This mode is intended to be used only when a treadmill is displayed in a store. When the demo mode is selected, the power cord can be plugged in, the key can be removed from the console, and the displays and indicators on the console will automatically light in a preset sequence. The buttons on the console will not function. If a "d" appears in the right display when the information mode is selected, press the Speed decrease button. 2 Press the On/Off button and adjust the brightness, contrast, color, sharpness, and/or hue of the television. A few seconds after the On/Off button is pressed, the brightness level indicator will appear on the television screen. Press the Volume buttons repeatedly to adjust the brightness setting if desired. Press the On/Off button to turn off the television. Note: Removing the key from the console will also turn off the television. Next, press the Channel buttons repeatedly until the contrast, color, sharpness, or hue level indicator appears. Adjust each setting, if desired, by pressing the Volume buttons. 22