ProForm Perspective 1.0 Lx Treadmill English Manual - Page 8

2. With the help of a second person, carefully raise the Uprights (84) to a vertical position. 2 Have the second person hold the console assembly near the Uprights (84) as shown. Look under the console assembly and locate the Console Wire Harness (78). Cut the plastic ties securing the Upright Wire Harness (77) to the right Upright (84). Next, connect the Upright Wire Harness to the Console Wire Harness (78). Make sure to connect the connectors properly (see the inset drawing). The connectors should slide together easily and snap into place. If the connectors do not slide together easily and snap into place, turn one connector and then try again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON. 3. Look under the console assembly and locate the TV cable. 3 Cut the plastic ties securing the Upright TV Cable (104) to the left Upright (84). Connect the Upright TV Cable to the TV cable on the console assembly. Console Assembly 78 77 78 77 84 Console Assembly TV Cable 104 84 4. Insert the Console Wire Harness (78) and the TV cable into the Uprights (84). Set the console assembly on the Uprights (84). Be careful to avoid pinching the Console Wire Harness (78) and the TV cable. While a second person holds the console assembly, attach it with four Console Bolts (64) and four Star Washers (8) as shown; start all four Console Bolts and then firmly tighten them. 4 Console Assembly 78 8 64 84 TV Cable 8 64 84 8