ProForm Space Saver 695 Elliptical Uk Manual - Page 18
HOW TO ADJUST THE DRIVE BELT, there, are three sizes of screws in the shields-note, which size
View all ProForm Space Saver 695 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
HOW TO ADJUST THE DRIVE BELT If you can feel the pedals slip while you are pedaling, even when the resistance of the pedals is at the highest setting, the drive belt may need to be adjusted. First, see step 11 on page 10 and remove the link arms. Next, see step 4 on page 7 and remove the crank arms. Then, remove all the screws from both shields; there are three sizes of screws in the shields-note which size of screw you remove from each hole. Then, gently pry the shields away from the frame. Tighten the M8 x 35mm Screw (96) until the Drive Belt (51) is tight. Then, 51 reattach the shields, the crank arms, and the link arms. Note: If you have questions as to which screw 96 should be in which hole, see EXPLODED DRAWING B on page 23 and the PART LIST on page 20. 18