ProForm Space Saver 695 Elliptical Uk Manual - Page 8

6. Orient the Left and Right Upright Covers (17, 18) as shown. Attach the Upright Covers around the Upright (3) with four M4 x 16mm Round Head Screws (101). 6 101 17 3 101 18 7. Apply a generous amount of the included grease to the Pivot Axle (74), and then apply a small amount of grease to two 22mm x 16mm Wave Washers (111). Insert the Pivot Axle (74) through the Upright (3). Place a 22mm x 16mm Wave Washer (111) on the left end of the Pivot Axle. Identify the Left Upper Body Leg (11), which is marked with an "L" sticker. Slide the Left Upper Body Leg (11) onto the Pivot Axle (74). Attach the Left Upper Body Leg with an M8 x 23mm Button Screw (84) and an M8 Washer (88). Attach the Right Upper Body Leg (12) in the same way. 7 84 11 Grease 88 111 3 Grease 111 12 74 84 88 8