ProForm Style 6500 Treadmill Uk Manual - Page 10

8. Next, finger tighten four M8 x 15mm Bolts (9) 8 with four M8 Handrail Star Washers (11) into the Right and Left Handrails (40, 70). Then, tighten all four handrail Bolts. 70 9 11 9 11 40 9 11 9 11 9. Have a second person raise and hold the treadmill Frame (36). Identify the Gas Spring (83). Note that the Gas Spring has a piston end and a cylinder end. See the two small inset drawings. Locate the Spring Clip Kit (90) in the piston end of the Gas Spring. Using your fingernail or the end of a screwdriver, press on the end of the Spring Clip to loosen it, rotate the Spring Clip, and then pull the Spring Clip out of the Gas Spring. Be careful to avoid losing the Spring Clip. Note: Extra Spring Clips are included. Next, hold the piston end of the Gas Spring (83) near the bracket in the center of the Frame (36). Press the end of the Gas Spring as far as possible onto the ball on the bracket. See drawing 9a. Insert the Spring Clip Kit (90) into the two indicated small holes in the piston end of the Gas Spring (83). Then, rotate the Spring Clip until it clips onto the Gas Spring. 9 Cylinder 83 36 Piston Bracket 90 9a 36 83 90 Holes 90 90 Bracket 10