ProForm Style 6500 Treadmill Uk Manual - Page 11

10. Pivot the cylinder end of the Gas Spring (83) down to the position shown. Remove the Spring Clip Kit (90) from the end of the Gas Spring. Next, align the cylinder end of the Gas Spring (83) with the bracket in the center of the Base (37). Press the end of the Gas Spring onto the ball on the bracket. Note: It may be necessary to pivot the Frame (not shown) forward or backward slightly to align the end of the Gas Spring with the ball. See drawing 10a. Insert the Spring Clip Kit (90) into the two indicated small holes in the Gas Spring (83). Then, rotate the Spring Clip until it clips onto the Gas Spring. With the help of a second person, lower the Frame (not shown) to the floor. 10 37 90 10a 83 Bracket 83 37 90 Holes Bracket 11. Lower the Uprights (38, 39) as shown. 11 See the inset drawing. Push the Uprights (38, 39) sideways so that the treadmill Frame (36) is centered between the Uprights. Firmly tighten the 3/8" x 2 1/4" Bolts (4) and the 3/8" x 2 3/4" Bolt (1) on each side of the treadmill. Do not overtighten the frame Bolts. 38 Side View 1 38, 39 4 36 View from Above 36 39 11