ProForm Xp 690t Treadmill User Manual - Page 10

7. Insert the bracket on the Left Handrail (82) into the Left Upright (84). Insert the Upright Wire (87) several inches downward into the Right Upright (85); make sure that the wire tie does not fall into the Right Upright. Then, insert the Right Handrail (83) into the Right Upright. Be careful not to pinch the Upright Wire. Orient the Console Frame (102) as shown, with the welded nuts on the bottom. Insert the ends of the Console Frame into the Left and Right Handrails (82, 83). Attach the Console Frame with four 1/4" x 1 1/4" Patch Bolts (9) and four 1/4" Star Washers (12). Start all four Patch Bolts before tightening any of them. Lift the Console Frame (102) and the Handrails (82, 83) off the Uprights (84, 85). Then, pull the Upright Wire (87) out of the Right Upright (85). 7 9 12 82 102 Welded Nuts Bracket 9 84 12 83 87 Wire Tie Welded Nuts 85 8. Set the console assembly (A) face-down on a soft surface to avoid scratching the console. 8 Attach the Left Accessory Tray (103) with four 3 #8 x 1/2" Screws (3). Start all four Screws be- fore tightening any of them. A Attach the Right Accessory Tray (104) as de- 3 scribed above. 3 104 103 10