ProForm Xp 690t Treadmill User Manual - Page 9
/4 Patch Bolt 7, and 3/8 Star Washer
View all ProForm Xp 690t Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
5. With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the 5 Frame (55) so that the treadmill is more stable; do not fully fold the Frame yet. Attach a Wheel (96) to the Base (95) with a 3/8" 89 x 2" Bolt (8) and a 3/8" Nut (10). Do not over- tighten the Nut; the Wheel must turn freely. Press a Base Cap (89) into the Base (95). 8 55 95 96 10 6. Align the oval hole in the Left Upright Spacer (88) with the oval hole in the Base (95) as described in step 3. Hold a Bolt Spacer (14) inside the lower end of the Left Upright (84). Insert a 3/8" x 4 1/4" Patch Bolt (7) with a 3/8" Star Washer (11) into the Left Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (14), 3/8" x 4 1/4" Patch Bolt (7), and 3/8" Star Washer (11). Hold the Left Upright Spacer (88) and the Left Upright (84) against the Base (95). Tighten the 3/8" x 4 1/4" Patch Bolts (7) until the heads of the Patch Bolts touch the Left Upright; do not fully tighten the Patch Bolts yet. With the help of a second person, tip the treadmill so that the Base (95) is flat on the floor. 6 7 11 14 95 84 88 9