ProForm Xp Trainer 580 Treadmill User Manual - Page 9

6. Hold a Bolt Spacer (81) inside the lower end of 6 the Left Upright (75). Insert a 3/8" x 4" Bolt (9) with a 3/8" Star Washer (12) into the Left 9 Upright and the Bolt Spacer. Repeat this step 75 with a second Bolt Spacer (81), 3/8" x 4" Bolt 12 (9), and 3/8" Star Washer (12). 86 Hold the Left Upright Spacer (86) and the Left 81 Upright (75) against the Base (87). Tighten the 3/8" x 4" Bolts (9) until the heads of the Bolts touch the Upright; do not fully tighten the Bolts yet. 81 83 87 Press a Base Cap (83) into the Base (87). With the help of a second person, tip the treadmill so that the Base (87) is flat on the floor. 7. Slide the Left Handrail Spacer (74) and the Right 7 Handrail Spacer (78) onto the top of the Left Upright (75) and Right Upright (80). 74 8. Insert the end of the Upright Wire (79) through 8 the bottom of the Right Handrail (104) and out the hole in the side of the Right Handrail. Slide a Handrail Cap (105) onto the ends of the Left Handrail (107) and Right Handrail (104). Insert the bracket on the the Handrails into the top of the Left Upright (75) and Right Upright (80). Remove the wire tie from the Upright Wire (79). 75 78 80 107 75 79 Wire Tie Hole 104 80 105 Bracket 105 9