ProForm Ze5 Elliptical English Manual - Page 7
mm Patch Screws 79 and five M10 Split
View all ProForm Ze5 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
3. Orient the Upright (2) as shown. 3 While a second person holds the Upright (2) near the Frame (1), connect the Upper Wire Harness (89) to the Wire Harness (42). Insert the Upright (2) into the Frame (1). Tip: Avoid pinching the wires. Attach the Upright (2) to the Frame (1) with five M10 x 20mm Patch Screws (79) and five M10 Split Washers (109). Do not tighten the Patch Screws yet. Avoid pinching the wires 109 79 2 1 89 42 109 79 7
7
3
3.
Orient the Upright (2) as shown.
While a second person holds the Upright (2)
near the Frame (1), connect the Upper Wire
Harness (89) to the Wire Harness (42).
Insert the Upright (2) into the Frame (1).
Tip: Avoid pinching the wires.
Attach the
Upright (2) to the Frame (1) with five M10 x
20mm Patch Screws (79) and five M10 Split
Washers (109).
Do not tighten the Patch
Screws yet.
2
89
42
79
79
109
109
Avoid pinching
the wires
1