ProForm Ze5 Elliptical English Manual - Page 8
the Patch Screw.
View all ProForm Ze5 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
4. Identify the Right Pedal Bracket (21) and the Right Upper Body Leg (6) assembly, which is 4 marked with a "Right" sticker. Then, identify the Right Pedal (13), which is marked with a "Right" sticker. Orient the Right Pedal (13), the Right Pedal Bracket (21), and the Right Upper Body Leg (6) as shown. Attach the Right Pedal (13) to the Right Pedal Bracket (21) with six M6 x 12mm Screws (84). 13 Repeat this step for the Left Pedal (not shown), the Left Pedal Bracket (not shown), and the Left Upper Body Leg (not shown). 6 21 5. Apply some of the included grease to the axle on the Right Upper Body Leg (6). 5 Slide the front end of the Right Pedal Arm (49) onto the axle on the Right Upper Body Leg (6). Attach the Right Pedal Arm (49) with an M8 x 18mm Patch Screw (80), a Pedal Arm Cap (30), and an M8 Washer (33). Do not overtighten the Patch Screw. Repeat this step to attach the Left Pedal Arm (not shown) to the Left Upper Body Leg (not shown). 84 84 84 6 Grease 49 33 30 80 8