RCA 25210RE1 User Guide - Page 17
Registration only applicable to handset, Register, Remove Handset
UPC - 044319703559
View all RCA 25210RE1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Programming the Telephone Registration (only applicable to handset) A cordless handset will not operate until it is registered to the base. During the registration process, keep the handset near the base. Up to 10 cordless handsets can be registered to one base. NOTE: If a handset has not been registered to the base, then the screen displays "PRESS "REG" TO INITIATE REGISTRATION" once the handset has been activated. Press the REG soft key to start the registration. From the Phone Setting Menu: 1. Press the VOL (+ or -) button to scroll to Registration. 2. Press SELECT soft key and you may program the following items: Register and Remove handset. Register From the Phone Setting Menu: 1. Press the VOL (+ or -) button to scroll to Register. 2. Press SELECT soft key. The screen displays "Press base unit Page button until beep". 3. Press and hold the Page button on base for 5 seconds. 4. "Registration" displays to indicate the base is now in registration mode. 5. If the registration is successful, the screen displays "Registration complete" for 2 seconds and emits a confirmation tone. 6. If the registration is failed (i.e. timeout), the screen displays "REGISTRATION FAILED!" for 2 seconds and emits an error tone. Remove Handset De-registration cancels registration. During the de-registration process, keep the handset near the base. WARNING: It is not recommended that a handset be deregistered unless absolutely necessary because once a handset is deregistered, that handset's telephone features cannot be used until the handset is re-registered. From the Phone Setting Menu: 1. Press the VOL (+ or -) button to scroll to the Remove handset. 2. Press SELECT soft key button. The screen displays "Remove handset?". 3. Press the YES soft key to confirm de-registration. The screen displays "Saved" and then displays "Press "REG" to initiate registration" in the handset. NOTE: You can press the REG soft key to enter the registation mode again. 17