RCA 25210RE1 User Guide - Page 36

Display Messages Display Messages The following messages show the status of the phone, provides Caller ID information, or helps you set up and use your phone. DELETE ALL? Prompt asking if you want to erase all records. DELETE? Prompt asking if you want to erase the current record. END/ START Indicates that it is the end of the list. ENTER NAME Prompt telling you to enter a name. ENTER NUMBER Prompt telling you to enter a telephone number. NEW CALLS Indicates call or calls which have not been reviewed. HANDSET NAME Prompt telling you to enter a user name for the hand set. UNAVAILABLE Indicates that the function you want to initialize cannot work at that moment or the function being worked cannot continue. The system is busy or some other higher priority function is being performed. For example, the message playback function will be stopped when there is an incoming call. NO LINE Indicates that the telephone line is not connected. LINE IN USE Display on handset while the line is in use. EMPTY Indicates there are no CID records in memory. OUT OF RANGE Indicates handset is too far away from the base, and the handset is searching for the base. BLOCKED Indicates the person is calling from a number which is blocked from transmission. UNKNOWN Indicates incoming call is from an area not serviced by CID or the CID information was not sent. Handset Sound Signals Signal A long warbling tone (with ringer on) Two short beeps (several times) One beep every 14 seconds One long beep after press one key A short warbling tone (with ringer on) Meaning Signals an incoming call Page signal Low battery warning Confirm Error 36