RCA RT2600 User Guide - Page 19

Operating your Receiver Operating the Radio The receiver has a built-in tuner that allows for AM/FM radio function. Manual tuning 1. Connect the FM and AM antenna accordingly (see "Connecting the Antenna" on page 5 section for details) 2. Press ON/STANDBY to switch on the receiver. 5- Tune the stations by pressing TUNING UP or DOWN repeatedly until the desired station is found. Alternatively, you can press and hold TUNING UP or DOWN for about one second to activate the automatic SEARCH function. In this mode the receiver will automatically tune frequencies until it finds a station RCE RCE FM/AM TUNING MEMORY ON/STANDBY MUTE 3. Press SOURCE keys to enter TUNER mode. SOURCE SOURCE FM/AM TUNIN NOTE 1. If there is interference, modify the location of the antenna until the optimal sound is heard. TV and other electronic devices could be the cause of interferences so try to position the antenna away from them. 2. Weak signal can affect the "auto Search function". Adjust the antenna for better reception for more efficient search. 4- To select band, press the FM/AM button to toggle between AM/FM mode. SOURCE SOURCE FM/AM TUNING MEM Select sound effect if needed by pressing Preset EQ or DSP sound (see "Advance sound section" for details). Selecting Mono or Stereo Sound Press ST/MONO on the main unit or the DIGITAL button on the remote control to toggle between mono and stereo sound in FM tuner mode (when available). SURR MODE SETUP TEST TONE EQ DIGITAL INPUT BA DSP MODE ST / MONO V 16