RCA RT2600 User Guide - Page 20

Operating your Receiver Storing radio stations: The receiver can store up to 40 radio stations in Manual preset 1. Select FM or AM band by pressing FM/AM EN memory. You can enter every single radio station repeatedly. yourself or the receiver can store all available radio station automatically in an ascending order. Automatic preset storing : (FM only) 1. Select the band by pressing FM/AM SOURCE SOURCE FM/AM TUNING MEM SOURCE SOURCE FM/AM TUNING MEMO 2. Tune to the radio station to be stored. (see "Manual tuning" on page 16 above for details) 2- Press and hold FM/AM on the main unit for 3 seconds. "MEMORY" will be displayed in red and will blink during the automatic storing process. SOURCE SOURCE FM/AM TUNING MEM 3. Press and hold the MEMORY button on the front panel or MENU on the remote control. "MEMORY" will flash and a preset number will be displayed on the display. TUNING MEMORY OK Radio frequencies will be scanned and radio station stored automatically. When all available radio sta- tions are stored or if all 40 memory locations are full, the auto preset will stop. 4. Press TUNING UP/DOWN, while CE FM/AM TUNING MEMORY MEMORY is still flashing CE NOTE to select the desired preset memory location. Weak signal can affect the "Automatic Preset Storing function" efficiency. Adjust the antenna for the best reception for more efficient search. 5. Press the MEMORY button on the front panel or the remote control to store frequency in selected preset location. 6. Repeat steps 1-5 to store other frequencies. 17