Ricoh 2210L Operating Instructions - Page 49
Speaker Volume, Using the Save Mode, Power Save Mode
UPC - 026649304705
View all Ricoh 2210L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Speaker Volume To adjust the volume using the On Hook Dial button: 1 Press On Hook Dial. A dial tone sounds from the speaker. 2 Press the scroll button ( or ) until you hear the loudness you want. The display shows the current volume level. 3 Press Clear/Stop to save the change and return to Standby mode. Using the Save Mode Power Save Mode Power Save mode allows your machine to reduce power consumption when it is not in actual use. You can turn this mode on by selecting the length of time for which the machine waits after a job is printed before it switches to a reduced power state. 1 Press Menu until "Machine Setup" appears on top line of the display. 2 Press the scroll button ( or ) until "Power Save" appears on the bottom line. Press Enter. 3 Press the scroll button ( or ) to display "On" on the bottom line and press Enter. Selecting "Off" means that Power Save mode turns off. 4 Press the scroll button ( or ) until the time settings you want appears. The available options are 5, 10, 15, 30 and 45 (minutes). 5 Press Enter to save the selection. 6 To return to Standby mode, press Clear/Stop. 1.34 GETTING STARTED