Ricoh Aficio MP 7500 S/P Printer Reference - Page 24
Setting Thick Paper or OHP Transparencies Using the Control Panel, Paper Type: Bypass Tray
View all Ricoh Aficio MP 7500 S/P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Setting Thick Paper or OHP Transparencies Using the Control Panel Follow the procedure below to set the machine using the control panel when loading thick paper or OHP transparencies onto the bypass tray. Important ❒ The following procedures are not required if you select [Driver / Command] from [Bypass Tray Setting Priority] in [System] of [Printer Features] (see "Printer Features", General Settings Guide). In that case, set the paper size using the printer driver. ❒ If you select [Machine Settings] from [Bypass Tray Setting Priority] in [System] of [Printer Features] (see "Printer Features", General Settings Guide), the settings made using the control panel have priority over the printer driver settings. ❒ If the printer driver is not used, select [Machine Settings] from [Bypass Tray Setting Priority] in [System] of [Printer Features] (see "Printer Features", General Settings Guide). Set the paper size using the control panel. A Press the {User Tools/Counter} key on the control panel. B Press [System Settings]. C Press the [Tray Paper Settings] tab. D Press [TNext] to scroll through the list. E Press [Paper Type: Bypass Tray]. F To print on OHP transparencies, press [OHP (Transparency)] in the [Paper Type] area. To print on thick paper, press [Thick paper] in the [Paper Type] area. G Press [OK]. The paper type selected is displayed. 16