Ricoh C210SF Network Users Guide - Page 61

machine. The upper green LED shows Link/Activity Received/Transmit status. The lower orange LED - troubleshooting

Get Ricoh C210SF - Aficio SP Color Laser PDF manuals and user guides
UPC - 026649025310
View all Ricoh C210SF manuals
Add to My Manuals
Save this manual to your list of manuals

Page 61 highlights

Troubleshooting 2 Check to see if there is any LED activity. The print servers have two LEDs on the back panel of the machine. The upper green LED shows Link/Activity (Received/Transmit) status. The lower orange LED shows Speed status. • No light: If the upper LED is off, then the print server is not connected to the network. • The upper LED is green: The Link/Activity LED will be green if the print server is connected to a 8 Ethernet network. • The lower LED is orange: The Speed LED will be orange if the print server is connected to a 100 Base TX Fast Ethernet network. • The lower LED is off: The Speed LED will be off if the print server is connected to a 10 Base T Ethernet network. 3 Print the Network Configuration List and check if the settings such as IP address settings are correct for your network. The problem may be the result of mismatched or duplicate IP address. Verify that the IP address is correctly loaded into the print server. And make sure that no other nodes on the network have this IP address. For information on how to print the Network Configuration List, see Printing the Network Configuration List on page 3-16. 4 Verify that the print server is on your network as follows: Try pinging the print server from the host operating system command prompt with the command: ping ipaddress Where ipaddress is the print server IP address (note that in some instances it can take up to two minutes for the print server to load its IP address after setting the IP address). 8 - 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
Troubleshooting
8 - 2
8
2
Check to see if there is any LED activity. The print servers have two LEDs on the back panel of the
machine. The upper green LED shows Link/Activity (Received/Transmit) status. The lower orange LED
shows Speed status.
•
No light: If the upper LED is off, then the print server is not connected to the network.
•
The upper LED is green: The Link/Activity LED will be green if the print server is connected to a
Ethernet network.
•
The lower LED is orange: The Speed LED will be orange if the print server is connected to a 100 Base
TX Fast Ethernet network.
•
The lower LED is off: The Speed LED will be off if the print server is connected to a 10 Base T Ethernet
network.
3
Print the Network Configuration List and check if the settings such as IP address settings are correct for
your network. The problem may be the result of mismatched or duplicate IP address. Verify that the IP
address is correctly loaded into the print server. And make sure that no other nodes on the network have
this IP address. For information on how to print the Network Configuration List, see
Printing the Network
Configuration List
on page 3-16.
4
Verify that the print server is on your network as follows:
Try pinging the print server from the host operating system command prompt with the command:
ping ipaddress
Where
ipaddress
is the print server IP address (note that in some instances it can take up to two
minutes for the print server to load its IP address after setting the IP address).