Ricoh C222DN Administration Guide - Page 254
Adjusting registrations, Setting basic functions
UPC - 026649060113
View all Ricoh C222DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 254 highlights
Using Smart Organizing Monitor • Tray 1: Type The following paper types are available: Thin Paper, Plain Paper, Plain Paper 2, Recycled Paper, Color Paper, Letterhead, Preprinted Paper, Prepunched Paper, Labels, Bond Paper, Cardstock, Thick Paper, Envelope, Any Type • Custom Paper Size You can make the custom paper size settings, when [Custom Paper Size] is selected. • Unit: You can specify the unit of measurement in "mm" or "inch". • Horizontal: You can specify the horizontal width between 90 and 216 mm. • Vertical: You can specify the vertical length between 148 and 356 mm. • Tray 2: Size The following sizes are available: A4 (210 x 297 mm), 8 1/2 x 11 • Tray 2: Type The following paper types are available: Thin Paper, Plain Paper, Plain Paper 2, Recycled Paper, Color Paper, Letterhead, Preprinted Paper, Prepunched Paper Note ❒ Tray 2 is available only when the optional paper feed unit is attached to the printer Adjusting registrations 8 On the [Maintenance] tab, you can adjust color registration and print starting positions. Normally, you do not have to adjust registrations. However, adjustments could be useful in some cases, especially when you want to print in the correct position. Under [Registration: Tray 2 Paper] and [Registration: Bypass Tray], you can adjust the print image position printed on the sheet fed from each tray. To check the adjustment result, use [Print Test Sheet]. Also, you can updated the firmware by clicking [Printer Firmware Update]. The latest version of the firmware can be downloaded form the supplier's website. Setting basic functions On the [System] tab, you can set basic functions required to use the printer. The printer can be used on factory-set defaults, but the configuration can be changed depending on the condition of the user. The changed condition holds even if the printer is turned off. The access code can be changed on this tab. 89