Ricoh CL7200 Product Guide - Page 11

G130/G131 Product Support Guide Printing Envelopes (Cont.) Paper thickness 72 - 90 g/m2 (19 - 24 lb.) Recommended weight and size • Inch version 24 lb, Com 10 Note: Make sure paper is not stacked higher than the paper guides inside the bypass tray. Printing on both-sides is not possible Do not place envelopes of differing sizes at the same time. You can place envelopes in short-edge feeding orientation, but this might result in creasing. Printer Driver Settings In the [Paper source tray] list, click [Bypass tray], and then in the [Paper type] list, click [Thick]. To set the print size, in the [Original size] list, click [Com10 Env.] or [Monarch Env.], and then in the [Printout paper size] list, click [Same as original size]. Limitations · Surface bumps may occur around stuck-down and overlapping areas. · Print positioning is easier with Com10 type envelopes than with the Monarch type. · If envelopes are bent or creased and do not feed in smoothly, paper jams may occur. · No more than 10 envelopes should be placed on the bypass tray at a time. · Envelopes should be printed under the normal temperature and humidity. Version - 1.0