Ricoh CL7200 Product Guide - Page 13

G130/G131 Product Support Guide PM Unit Yield The yield of the development units, PCUs, fusing unit is affected by the number of print / job (P/J). This is because the actual life of them is determined how many times each unit rotates, as shown in the following table. PM unit Black PCU Expected Yield (prints) 3P/J 40K Yield Target Number of Rotations Number of Prints 280k 40K Color PCU 40K 280k 40K Black Development 80K Color Development Unit 80k Fusing Unit 80k 860k 80K 870K 80k 8190k 80k The number of rotation per page depends on the P/J. If the P/J is lower than "3", the number of rotations made for a page increases because the machine always stops a specific time after the last sheet is fed out regardless of the P/J condition. The following table shows the expected number of prints made depending on the P/J. It also shows the expected yield at 1P/J,and 2P/J as a percentage when the percentage for 3P/J is 100%. G130/G131 Maintenance Kit Black PCU Color PCU Black Development Color Development Unit Fusing Unit Number of Prints (%) 1P/J 2P/J 19.8 (49.5%) 31.7 (79.2%) 19.8 (49.5%) 31.8 (79.6%) 58.3 (72.9%) 73.3 (91.6%) 58.8 (73.5%) 74.6 (93.2%) 40.5 (50.6%) 64.4 (80.5%) 3P/J 40 (100%) 40 (100%) 80 (100%) 80 (100%) 80 (100%) Version - 1.0