Ricoh CL7200 Product Guide - Page 14

G130/G131 Product Support Guide The diagram on the below is a graph made from the data in the above table. As explained on the previous page, the yield of the PM parts depends on the number of rotations for a page. (This system for assessing yield is common in the printer field.) The expected yield of all PM parts is calculated under a specific condition (3P/J, A4/LT long-edge feed, and 5% image coverage ratio). P/J particularly affects the unit yield. prints 100.0 80.0 60.0 40.0 20.0 0.0 PM Inerval (P/J) 1 2 3 P/ J PCU(Bk) PCU(FC) Dev(Bk) Dev(FC) Fusing Note: Machine works for making patterns in process control self-check and lines position adjustment (MUSIC) or performs idling when turning on the main switch. While the machine is in these modes (self-check, MUSIC, and idling), the yield counter (rotation counter) of maintenance kits counts up without making outputs. Performing self-check, MUSIC or power OFF/ON of machine excessively affects the unit yield. If making a meter charge contract with customers and if the meter charge fee is always the same for all users, this may cause a reduction in profits depending on how a customer makes prints. Therefore, it is recommended to consider the expected P/J and print volume for each user when making a service contract. Version - 1.0