Ricoh CL7200 Product Guide - Page 5

G130/G131 Product Support Guide Installation Requirements 1. Temperature Range: 10°C to 32°C (50°F to 89.6°F) 2. Humidity Range: 15% to 80% RH 3. Ambient Illumination: Less than 2,000 lux (do not expose to direct sunlight) 4. Ventilation: 3 times/hour/person or more 5. Do not expose the machine to the following: 1) Direct cool air from an air conditioner 2) Direct heat from a heater 6. Do not install the machine in areas that get exposed to corrosive gas. 7. Install the machine locations lower than 2,500 m (8,200 ft.) above sea level. 8. Install the machine on a strong, level base. 9. Do not install the machine in areas that get strong vibrations. Machine level Front to back: Within 5 mm (0.2") Right to left: Within 5 mm (0.2") Power Requirements • Input voltage level: 120 V, 60 Hz: More than 11A (G130) / 12A (G131) • Permissible voltage fluctuation: ±10 % • Do not place anything on the power cord • The required wall outlet is a NEMA 5-15R CAUTION: Make sure the outlet and the machine are grounded. CAUTION: Insert the plug firmly into the outlet. CAUTION: Avoid using an extension cord or adapter plug. Installation Times Mainframe: 30 minutes Peripherals: Peripherals, which can be installed by users: PFU/LCT 15 minutes Duplex Unit 15 minutes IEEE1284 5 minutes IEEE1394 5 minutes Blue tooth 5 minutes Wireless LAN 5 minutes USB Host I/F 5_____minutes Direct Camera Printing 5_____minutes Gigabit Ethernet 5_____minutes Peripherals, which should be installed by technicians: Finishers 15 minutes Punch Kit 15 minutes NOTE: These are installation times for after the machine has been removed from the carton. Version - 1.0