Ricoh Pro C5110s User Guide - Page 57
Placing Originals, Placing Originals on the Exposure Glass
View all Ricoh Pro C5110s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Placing Originals Placing Originals on the Exposure Glass Placing Originals • Keep your hands away from the hinges and exposure glass when lowering the ADF. Not doing so may result in an injury if your hands or fingers are pinched. • Do not lift the ADF forcefully. Otherwise, the cover of the ADF might open or be damaged. 1. Lift the ADF. Be sure to lift the ADF by more than 30 degrees. Otherwise, the size of the original might not be detected correctly. 2. Place the original face down on the exposure glass. The original should be aligned to the rear left corner. Start with the first page to be scanned. 1 CVA049 1. Positioning mark 3. Lower the ADF. Placing Originals in the Auto Document Feeder Be sure not to block the sensor or load the original untidily. Doing so may cause the machine to detect the size of the original incorrectly or display a paper misfeed message. Also, be sure not to place originals or other objects on the top cover. Doing so may cause a malfunction. 49