Rocketfish RF-RBWHP01 User Manual (English) - Page 20
Joining the headphones and docking station to an existing, Rocketboost network
UPC - 600603132285
View all Rocketfish RF-RBWHP01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
To join the headphones to the docking station: Docking station (HUB: ENABLE) Headphones + other Rocketfish devices. Rocketfish sender/receiver RF-RBAUX (HUB: DISABLE) 1 Set the HUB switch on the docking station to ENABLE if this is your first Rocketboost™ product set. • The power indicators turn green when the HUB switch is set to ENABLE. • The power indicators turn blue when the HUB switch is set to DISABLE. 2 Press and hold the CONNECT button on the docking station for more than three seconds to put it into joining mode. The power indicator starts blinking rapidly and the unit will stay in joining mode for 30 seconds. 3 Press and hold the CONNECT button on the headphone for more than three seconds so the docking station and headphone enter joining mode. • The power indicators light steadily if the joining was successful. • The power indicators blink slowly if the joining was not successful. Joining the headphones and docking station to an existing Rocketboost network Use this procedure only if you are adding this product to an existing Rocketboost network. You need to join both the docking station and the headphone to your existing hub device, using the following steps. 20