Rocketfish RF-RBWHP01 User Manual (English) - Page 21

To join an existing Rocketboost network: Rocketfish sender/receiver RF-RBAUX or other Rocketboost device. (HUB: ENABLE) Docking station Headphones (HUB: DISABLE) RF-RBAUX (HUB: DISABLE) 1 Set the HUB switch on the docking station to DISABLE. • The power indicators turn green when the HUB switch is set to ENABLE. • The power indicators turn blue when the HUB switch is set to DISABLE. 2 Press and hold the POWER button on the your Rocketboost Hub device for more than three seconds to put it into joining mode. The power indicator starts blinking rapidly and the unit will stay in joining mode for 30 seconds. 3 Press and hold the CONNECT button on the docking station for more than three seconds so the Hub device and docking station enter joining mode. • The power indicators light steadily if the joining was successful. • The power indicators blink slowly if the joining was not successful. 4 Press and hold the POWER button on the your Rocketboost Hub device for more than three seconds to put it into joining mode. The power indicator starts blinking rapidly and the unit will stay in joining mode for 30 seconds. 5 Press and hold the CONNECT button on the headphone for more than three seconds so the Hub device and headphone enter joining mode. • The power indicators light steadily if the joining was successful. • The power indicators blink slowly if the joining was not successful. RF-RBWHP01 21