Ryobi BG828G User Manual 3 - Page 7
Assembly, Features - arbor
View all Ryobi BG828G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
FEATURES PRODUCT SPECIFICATIONS Wheel Diameter 6 in. Wheel Thickness 3/4 in. Arbor Hole 1/2 in. No Load Speed 3,600 r/min. (RPM) Input 120 V~, 2.1 A, 60 Hz ASSEMBLY UNPACKING This product requires assembly. Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included. WARNING: Always spin the wheel by hand before turning on the grinder to make sure the spark deflector doesn't hit the grinding wheel. WARNING: Do not use this product if it is not completely assembled or if any parts appear to be missing or damaged. Use of a product that is not properly and completely assembled could result in serious personal injury. Inspect the tool carefully to make sure no breakage or damage occurred during shipping. Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool. If any parts are damaged or missing, please call 1-800-525-2579 for assistance. WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury. WARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. WARNING: Do not connect to power supply until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury. TOOLS NEEDED See Figure 2, page 11. The following tools (not included or drawn to scale) are needed for assembly: Adjustable Wrench Phillips Screwdriver loose parts list See Figure 3, page 11. The following items are included with the tool: Screw 4 Washer 4 Lock washer 4 Spark shield 1 Carriage bolt 2 Work rest knob 2 Left work rest 1 Right work rest 1 Spark shield with magnifier 1 Spark Deflector with LED 2 Spacer 1 Batteries (AAA 4 Attaching spark shield to spark deflector with LED See Figure 4, page 12. Hold the bolt and rotate the spark shield knob counterclockwise to loosen. Remove the bolt and spark shield knob. Place spark shield onto spark deflector with LED assembly. Align the holes in the spark shield with the holes in the spark deflector with LED assembly. 7 − English