Ryobi TS1142L User Manual - Page 15

Warning, Caution

Get Ryobi TS1142L PDF manuals and user guides View all Ryobi TS1142L manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

ASSEMBLY  Using the wrench provided, loosen and remove the blade bolt. Note: The blade bolt has left hand threads. Turn blade bolt clockwise to loosen.  Remove outer blade washer. Do not remove inner blade washer.  Wipe a drop of oil onto inner blade washer and outer blade washer where they contact the blade. WARNING: If inner blade washer has been removed, replace it before placing blade on spindle. Failure to do so could cause an accident since blade will not tighten properly.  Fit saw blade inside lower blade guard and onto spindle. The blade teeth point downward at the front of saw as shown in figure 10.  Replace outer blade washer. Double "D" flats on blade washers align with flats on spindle.  Depress and hold spindle lock button and replace blade bolt. Note: The blade bolt has left hand threads. Turn blade bolt counterclockwise to tighten. Caution: Always install the blade with the blade teeth and the arrow printed on the side of the blade pointing down at the front of the saw. The direction of blade rotation is also stamped with an arrow on the upper blade guard.  Tighten blade bolt securely.  Replace the lower blade guard and blade bolt cover.  Replace blade bolt cover screw and tighten securely. outer blade washer blade BOLT flat washer Blade Inner Blade washer Blade BOLT cover Lower blade guard Blade To LOOSEN Blade BOLT To Tighten NOTE: before use, replace SCREW and tighten SECURELY to prevent guard movement BLADE BOLT COVER SCREW Flat(S) on Spindle Inner Blade Washer WITH DOUBLE "D" FLATS Outer Blade Washer WITH DOUBLE "D" FLATS Fig. 10 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
15
ASSEMBLY
Using the wrench provided, loosen and remove the blade
bolt.
NOTE:
The blade bolt has left hand threads. Turn blade
bolt clockwise to loosen.
Remove outer blade washer.
Do not
remove inner blade
washer.
Wipe a drop of oil onto inner blade washer and outer
blade washer where they contact the blade.
WARNING:
If inner blade washer has been removed, replace it before
placing blade on spindle. Failure to do so could cause an
accident since blade will not tighten properly.
Fit saw blade inside lower blade guard and onto spindle.
The blade teeth point downward at the front of saw as
shown in figure 10.
Replace outer blade washer. Double “D” flats on blade
washers align with flats on spindle.
Depress and hold spindle lock button and replace blade
bolt.
NOTE:
The blade bolt has left hand threads. Turn blade bolt
counterclockwise to tighten.
CAUTION:
Always install the blade with the blade teeth and the
arrow printed on the side of the blade pointing down at
the front of the saw. The direction of blade rotation is
also stamped with an arrow on the upper blade guard.
Tighten blade bolt securely.
Replace the lower blade guard and blade bolt cover.
Replace blade bolt cover screw and tighten securely.
NOTE: BEFORE USE,
REPLACE SCREW AND
TIGHTEN SECURELY
TO PREVENT GUARD
MOVEMENT
Fig. 10
LOWER
BLADE
GUARD
BLADE
OUTER BLADE
WASHER WITH
DOUBLE “D” FLATS
BLADE
BOLT
TO
TIGHTEN
TO
LOOSEN
BLADE BOLT
COVER
SCREW
FLAT(S)
ON SPINDLE
BLADE
BOLT
COVER
INNER BLADE
WASHER WITH
DOUBLE “D” FLATS
BLADE
BOLT
OUTER
BLADE
WASHER
BLADE
INNER
BLADE WASHER
FLAT
WASHER