Samsung 460EX User Manual - Page 135
MagicInfo, ID Setup, ID Input, MDC Connection, Network Setting, IP Setting, Manual, IP Address
View all Samsung 460EX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Adjusting the LCD Display → , → [0~9] • ID Setup Assigns distinctive IDs to the SET. • ID Input Use to select the transmitter functions of the individual SET. Only a SET where the ID corresponds to the transmitter setting becomes activated. • MDC Connection Selects a port to receive the MDC inputs from. • Communicates with the MDC via a Serial MDC cable. • Communicates with the MDC via an RJ 45 MDC cable. • Network Setting • IP Setting : Manual, Auto • IP Address : Manually enter the IP Address if IP Setting is set to Manual. • Subnet Mask : Manually enter the Subnet Mask if IP Setting is set to Manual. • Gateway : Manually enter the Gateway if IP Setting is set to Manual. MagicInfo Available Modes • PC • AV • Component • HDMI • MagicInfo Note For an EX model, • MagicInfo can only be enabled when a network box is connected. • The HDMI port and network box cannot be connected at the same time. Note • The remote control can be used to select MagicInfo. However, it is recommended to use a separate USB keyboard to utilize MagicInfo fully. • For MagicInfo in Device mode, moving external devices while booting may cause errors. Set up external devices only if the LCD Display turns on. 92