Samsung 740T User Manual (ENGLISH)

Samsung 740T - SyncMaster - 17" LCD Monitor Manual

Get Samsung 740T - SyncMaster - 17inch LCD Monitor PDF manuals and user guides
UPC - 729507709277
View all Samsung 740T manuals
Add to My Manuals
Save this manual to your list of manuals

Samsung 740T manual content summary:

  • Samsung 740T | User Manual (ENGLISH) - Page 1
    Install drivers Install programs SyncMaster 740B / 940B / 740N / 940Fn / 540B / 540N / 740T / 940T / 940N / 940Be
  • Samsung 740T | User Manual (ENGLISH) - Page 2
    Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Prohibited Do not disassemble Do not touch Important to read and understand at all times Disconnect the plug from the outlet Grounding to prevent an electric shock Power When not
  • Samsung 740T | User Manual (ENGLISH) - Page 3
    extension cords or plugs to one outlet. z This may cause fire. Do not disconnect the power cord while using the monitor. z A surge may be caused by the separation and may damage the monitor. Do not use the power cord when the connector or plug is dusty. z If the connector or plug of
  • Samsung 740T | User Manual (ENGLISH) - Page 4
    Be sure to contact an authorized Service Center, when installing your monitor in a location with heavy dust, high or low temperatures, high humidity, and exposed to chemical substances and where it operates for 24 hours such as
  • Samsung 740T | User Manual (ENGLISH) - Page 5
    place the monitor face down. z This may damage the TFT-LCD surface. The installation of the bracket must be done by a qualified professional. z Installing the bracket by unqualified personnel may result in injury. z Always use the mounting device specified in the owner's manual. When installing the
  • Samsung 740T | User Manual (ENGLISH) - Page 6
    an authorized dealer or Service Center. z This may cause electric shock or fire. Keep the product away from places exposed to oil, smoke or moisture; do not install inside a vehicle. z This may cause a malfunction, electric shock or fire. z In particular, avoid operating the monitor near water or
  • Samsung 740T | User Manual (ENGLISH) - Page 7
    . z This may cause a malfunction, electric shock or fire. z If a foreign substance enters the monitor, unplug the power cord and contact a Service Center. Keep the product away from combustible chemical sprays or inflammable substances. z This may cause an explosion or fire. Never insert anything
  • Samsung 740T | User Manual (ENGLISH) - Page 8
    the wall outlet and contact a Service Center. When viewing a fixed screen monitor for an extended period of time. Adjust the resolution and frequency to the levels appropriate for the model. z An inappropriate resolution every hour of using the monitor. Do not install the product on an unstable,
  • Samsung 740T | User Manual (ENGLISH) - Page 9
    . Look at the screen from slightly above it, and have the monitor directly in front of you. z Tilt the monitor upwards by 10 ~20 degrees. Adjust the monitor height so that the top of the monitor is slightly below eye level. z Adjust the monitor angle so that there is no reflected light on the screen
  • Samsung 740T | User Manual (ENGLISH) - Page 10
    SyncMaster 740B / 940B Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking Type 1 Type 2 Monitor & Simple stand Bottom MagicRotation program can not be provided as Simple
  • Samsung 740T | User Manual (ENGLISH) - Page 11
    Type 4 Monitor & Sliding Stand Monitor & Lowest HAS Stand Manual Quick Setup Guide Cable Warranty Card (Not available in all locations) User's Guide, Monitor Driver, Natural Color software, MagicTune™ software MagicRotation software D-sub Cable Power Cord DVI Cable (option) Front
  • Samsung 740T | User Manual (ENGLISH) - Page 12
    pictures such as a DVD or Video CD. >>Click here to see an animation clip Brightness button When OSD is not on the screen, push the button to adjust [] appears in the upper left of the screen displaying the current mode -- analog or digital input signal.) Note : If you select the digital
  • Samsung 740T | User Manual (ENGLISH) - Page 13
    glows blue during normal operation, and blinking blue once as the monitor saves your adjustments. See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended
  • Samsung 740T | User Manual (ENGLISH) - Page 14
    included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking Type 1 Type 2 Monitor & Simple stand Bottom MagicRotation program can not be provided as Simple Stand does not support Pivot function. Manual Monitor & Pivot stand
  • Samsung 740T | User Manual (ENGLISH) - Page 15
    Cable Warranty Card (Not available in all locations) User's Guide, Monitor Driver, Natural Color software, MagicTune™ software MagicRotation software D-sub Cable Power Cord DVI Cable (option) Front MENU button [ ] MagicBright™™ [] Opens the OSD menu. Also use to
  • Samsung 740T | User Manual (ENGLISH) - Page 16
    such as a DVD or Video CD. >>Click here to see an animation clip Brightness button When OSD is not on the screen, push the button to of the screen displaying the current mode -- analog or digital input signal.) Note : If you select the digital mode, you must connect your monitor to the graphic
  • Samsung 740T | User Manual (ENGLISH) - Page 17
    the power cord for your monitor to the power port on the back of the monitor. Connect the DVI Cable to the DVI port on the back of your monitor. Connect the signal cable to the 15-pin, D-sub port on the back of your monitor. The Kensington lock is a device used to physically fix the system
  • Samsung 740T | User Manual (ENGLISH) - Page 18
    SyncMaster 740N / 940N Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking Type 1 Type 2 Monitor & Simple stand Bottom MagicRotation program can not be provided as Simple
  • Samsung 740T | User Manual (ENGLISH) - Page 19
    Type 4 Monitor & Sliding Stand Monitor & Lowest HAS Stand Manual Quick Setup Guide Cable Warranty Card (Not available in all locations) User's Guide, Monitor Driver, Natural Color software, MagicTune™ software MagicRotation software D-sub Cable Power Cord Front
  • Samsung 740T | User Manual (ENGLISH) - Page 20
    motion pictures such as a DVD or Video CD. >>Click here to see an animation clip Brightness button [] Adjust buttons [ ] When OSD is not on the screen, push the [ ]/ Power indicator Use this button for turn the monitor on and off. / This light glows blue during normal operation, and blinking blue
  • Samsung 740T | User Manual (ENGLISH) - Page 21
    See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. Rear Simple stand Pivot stand / Sliding Stand (The configuration at the
  • Samsung 740T | User Manual (ENGLISH) - Page 22
    included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking Type 1 Type 2 Monitor & Simple stand Bottom MagicRotation program can not be provided as Simple Stand does not support Pivot function. Manual Monitor & Pivot stand
  • Samsung 740T | User Manual (ENGLISH) - Page 23
    Cable Warranty Card (Not available in all locations) User's Guide, Monitor Driver, Natural Color software, MagicTune™ software MagicRotation software D-sub Cable Power Cord Front MENU button [ ] MagicBright™™ [] Opens the OSD menu. Also use to exit the OSD
  • Samsung 740T | User Manual (ENGLISH) - Page 24
    as a DVD or Video CD. >>Click here to see an animation clip Brightness button [] Adjust buttons [ ] Enter button [ ] When OSD monitor saves your adjustments. See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor
  • Samsung 740T | User Manual (ENGLISH) - Page 25
    the signal cable to the 15-pin, D-sub port on the back of your monitor. The Kensington lock is a device used to physically fix the system to something when .) For using a locking device, contact the place of purchase. See Connecting the Monitor for further information regarding cable connections.
  • Samsung 740T | User Manual (ENGLISH) - Page 26
    , contact your dealer. Contact a local dealer to buy optional items. Unpacking Manual Monitor & Pivot stand Quick Setup Guide Cable Warranty Card (Not available in all locations) User's Guide, Monitor Driver, Natural Color software, MagicTune™ software MagicRotation software 'DVI-A to D-sub
  • Samsung 740T | User Manual (ENGLISH) - Page 27
    . 5) Sport For watching motion pictures such as a sport. 6) Movie For watching motion pictures such as a DVD or Video CD. >>Click here to see an animation clip Brightness button When OSD is not on the screen, push the button to adjust [] brightness. Adjust buttons [ ] Adjust items in the menu.
  • Samsung 740T | User Manual (ENGLISH) - Page 28
    is pressed to change the input mode, a message appears in the upper left of the screen displaying the current mode -- analog or digital input signal.) Note : If you select the digital mode, you must connect your monitor to the graphic card's DVI port using the DVI cable. Use this button for auto
  • Samsung 740T | User Manual (ENGLISH) - Page 29
    SyncMaster 740T / 940T Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking Type 1 Type 2 Monitor & Simple stand Bottom MagicRotation program can not be provided as Simple
  • Samsung 740T | User Manual (ENGLISH) - Page 30
    Monitor & Lowest HAS Stand Manual Quick Setup Guide Cable Warranty Card (Not available in all locations) User's Guide, Monitor Driver, Natural Color software, MagicTune™ software MagicRotation software D-sub Cable Power Cord DVI Cable (option) Front
  • Samsung 740T | User Manual (ENGLISH) - Page 31
    pictures such as a DVD or Video CD. >>Click here to see an animation clip Brightness button When OSD is not on the screen, push the button to adjust [] appears in the upper left of the screen displaying the current mode -- analog or digital input signal.) Note : If you select the digital
  • Samsung 740T | User Manual (ENGLISH) - Page 32
    glows blue during normal operation, and blinking blue once as the monitor saves your adjustments. See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended
  • Samsung 740T | User Manual (ENGLISH) - Page 33
    with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking Type 1 Type 2 Monitor & Simple stand Bottom MagicRotation program can not be provided as Simple Stand does not support Pivot function. Manual Monitor & Sliding Stand
  • Samsung 740T | User Manual (ENGLISH) - Page 34
    Cable Warranty Card (Not available in all locations) User's Guide, Monitor Driver, Natural Color software, MagicTune™ software MagicRotation software D-sub Cable Power Cord DVI Cable (option) Front MENU button [ ] MagicBright™™ [] Opens the OSD menu. Also use to
  • Samsung 740T | User Manual (ENGLISH) - Page 35
    such as a DVD or Video CD. >>Click here to see an animation clip Brightness button When OSD is not on the screen, push the button to of the screen displaying the current mode -- analog or digital input signal.) Note : If you select the digital mode, you must connect your monitor to the graphic
  • Samsung 740T | User Manual (ENGLISH) - Page 36
    port POWER on/off Switch (option) Kensington Lock Connect the power cord for your monitor to the power port on the back of the monitor. Connect the DVI Cable to the DVI port on the back of your monitor. Connect the signal cable to the 15-pin, D-sub port on the back of
  • Samsung 740T | User Manual (ENGLISH) - Page 37
    a Macintosh. Connect the monitor to the Macintosh computer using the D-sub connection cable. 2-4. In the case of an old model Macintosh, you need to connect the monitor using a special Mac adapter. 3. Turn on your computer and monitor. If your monitor displays an image, installation is complete.
  • Samsung 740T | User Manual (ENGLISH) - Page 38
    Using the Stand Monitor Assembly Monitor and Bottom Pivot Stand / Sliding Stand A.Stand Stopper Attaching a Base This monitor accepts a 75 mm x 75 mm VESA-compliant mounting interface pad.
  • Samsung 740T | User Manual (ENGLISH) - Page 39
    -down on a flat surface with a cushion beneath it to protect the screen. 3. Remove four screws and then remove the stand from the LCD monitor. 4. Align the mounting interface pad with the holes in the rear cover mounting Pad and secure it with four screws that came with the arm-
  • Samsung 740T | User Manual (ENGLISH) - Page 40
    . Connect the monitor to the Macintosh computer using the D-sub connection cable. 2-3. In the case of an old model Macintosh, you need to connect the monitor using a special Mac adapter. 3. Turn on your computer and monitor. If your monitor displays an image, installation is complete. Using
  • Samsung 740T | User Manual (ENGLISH) - Page 41
    Monitor Assembly Monitor and Bottom Swivel stand Pivot Stand / Sliding Stand
  • Samsung 740T | User Manual (ENGLISH) - Page 42
    -down on a flat surface with a cushion beneath it to protect the screen. 3. Remove four screws and then remove the stand from the LCD monitor. 4. Align the mounting interface pad with the holes in the rear cover mounting Pad and secure it with four screws that came with the arm-
  • Samsung 740T | User Manual (ENGLISH) - Page 43
    . Connect the monitor to the Macintosh computer using the 'DVI-A to D-SUB' connection cable. 2-4. In the case of an old model Macintosh, you need to connect the monitor using a special Mac adapter. 3. Turn on your computer and monitor. If your monitor displays an image, installation is complete.
  • Samsung 740T | User Manual (ENGLISH) - Page 44
    -down on a flat surface with a cushion beneath it to protect the screen. 3. Remove four screws and then remove the stand from the LCD monitor. 4. Align the mounting interface pad with the holes in the rear cover mounting Pad and secure it with four screws that came with the arm-
  • Samsung 740T | User Manual (ENGLISH) - Page 45
    . Connect the monitor to the Macintosh computer using the D-sub connection cable. 2-3. In the case of an old model Macintosh, you need to connect the monitor using a special Mac adapter. 3. Turn on your computer and monitor. If your monitor displays an image, installation is complete. Using
  • Samsung 740T | User Manual (ENGLISH) - Page 46
    Monitor Assembly Monitor and Bottom Pivot Stand A.Stand Stopper Attaching a Base This monitor accepts a 75 mm x 75 mm VESA-compliant mounting interface pad.
  • Samsung 740T | User Manual (ENGLISH) - Page 47
    then remove the stand from the LCD monitor. 4. Align the mounting interface pad with the holes in the rear cover mounting Pad and secure it with four screws that came with the arm-type base, wall mount hanger or other base. Installing the Monitor Driver (Automatic) When prompted by the operating
  • Samsung 740T | User Manual (ENGLISH) - Page 48
    is under certifying MS logo,and this installation don't damage your system.The certified driver will be posted on Samsung Monitor homepage http://www.samsung.com/. 5. Monitor driver installation is completed. Installing the Monitor Driver (Manual) Windows XP | Windows 2000 |Windows Me |Windows
  • Samsung 740T | User Manual (ENGLISH) - Page 49
    3. Click "Display" icon and choose the "Settings" tab then click "Advanced..". 4. Click the "Properties" button on the "Monitor" tab and select "Driver" tab. 5. Click "Update Driver.." and select "Install from a list or.." then click "Next" button. 6. Select "Don't search ,I will.." then click "Next
  • Samsung 740T | User Manual (ENGLISH) - Page 50
    then click the "Continue Anyway" button. Then click "OK" button. This monitor driver is under certified MS logo,and this installation doesn't damage your system.The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/ 9. Click the "Close" button then click "OK" button
  • Samsung 740T | User Manual (ENGLISH) - Page 51
    , it means your monitor is properly configured. Please stop installation Case2: If the "Properties" button is active, click the "Properties" button then follow next steps continually. 5. Click "Driver" and then click on "Update Driver.." then click on the "Next" button. 6. Choose "Display a list of
  • Samsung 740T | User Manual (ENGLISH) - Page 52
    not normal, change to a different mode (lower mode of resolution, colors or frequency). If there is no Mode at All Display Modes, select the level of resolution and vertical frequency by referring to the Preset Timing Modes in the user guide. Linux Operating System To execute X-Window, you need to
  • Samsung 740T | User Manual (ENGLISH) - Page 53
    ROM Drive, click the Windows [Start] button, select [Run...]. Enter D:\color\NCProsetup.exe and then press the key. (If the drive where the CD is inserted is not D:\, enter the applicable drive.) Uninstalling the Natural Color Software Program Select "Setting/Control Panel" on the "Start"
  • Samsung 740T | User Manual (ENGLISH) - Page 54
    SyncMaster 740B / 940B 1. [ ]Opens the on-screen menu and exits from the menu or closes the adjustment menu. 2. [ ]This button allows you to adjust items in the
  • Samsung 740T | User Manual (ENGLISH) - Page 55
    screen appears as shown in the animated screen on the center. Auto adjustment allows the monitor to self-adjust to the incoming video signal. The values of fine, coarse and position more accuracy. - If you change resolution in the control panel, auto function will be executed automatically. Locked
  • Samsung 740T | User Manual (ENGLISH) - Page 56
    the "MENU" button more than 5 seconds, OSD function is locked (unlocked). You can also adjust the brightness and contrast of the monitor with the OSD adjustment locking feature. MagicBright™ Menu Description Push the MagicBright button to circle through available preconfigured MagicBright™ modes
  • Samsung 740T | User Manual (ENGLISH) - Page 57
    Brightness Menu Brightness Description When OSD is not on the screen, push the button to adjust brightness. SOURCE Menu SOURCE Description Selects the video signal while the OSD is off.
  • Samsung 740T | User Manual (ENGLISH) - Page 58
    Language Auto Source Contrast Color Tone Fine H-Position Image Reset Color Control Sharpness V-Position Color Reset Gamma H-Position Transparency V-Position Display Time Picture Menu Brightness Contrast Description You can use the on-screen menus to change the brightness according to personal
  • Samsung 740T | User Manual (ENGLISH) - Page 59
    Menu MagicColor Description MagicColor is a new technology that Samsung has exclusively developed to improve digital image and to display natural color more clearly without disturbing image quality. Play/Stop 1) Off - Returns to the original mode. 2) Demo - The screen before applying MagicColor
  • Samsung 740T | User Manual (ENGLISH) - Page 60
    ). (Available in analog mode only) Changes the clearance of image. (Not available in MagicColor mode of Full and Intelligent.) Changes the horizontal position of the monitor's entire display. (Available in analog mode only) Changes the vertical position of the
  • Samsung 740T | User Manual (ENGLISH) - Page 61
    one of 9 languages. Play/Stop Language H-Position V-Position Transparency Display Time Note:The language chosen affects only the language of the OSD OSD menu appears on your monitor. You can change the vertical position where the OSD menu appears on your monitor. Change the transparency of the
  • Samsung 740T | User Manual (ENGLISH) - Page 62
    Menu Auto Source Image Reset Color Reset Description Select Auto Source for the monitor to automatically select the signal source. Image parameters are replaced with the factory default values. Color parameters are replaced with the factory default values. Play/Stop Information
  • Samsung 740T | User Manual (ENGLISH) - Page 63
    Menu Information Description Shows a video source, display mode on the OSD screen.
  • Samsung 740T | User Manual (ENGLISH) - Page 64
    SyncMaster 740N / 940N 1. [ ]Opens the on-screen menu and exits from the menu or closes the adjustment menu. 2. [ ]This button allows you to adjust items in the
  • Samsung 740T | User Manual (ENGLISH) - Page 65
    screen appears as shown in the animated screen on the center. Auto adjustment allows the monitor to self-adjust to the incoming video signal. The values of fine, coarse and position more accuracy. - If you change resolution in the control panel, auto function will be executed automatically. Locked
  • Samsung 740T | User Manual (ENGLISH) - Page 66
    the "MENU" button more than 5 seconds, OSD function is locked (unlocked). You can also adjust the brightness and contrast of the monitor with the OSD adjustment locking feature. MagicBright™ Menu Description Push the MagicBright button to circle through available preconfigured MagicBright™ modes
  • Samsung 740T | User Manual (ENGLISH) - Page 67
    Image OSD Setup Information Brightness MagicColor Coarse Language Image Reset Contrast Color Tone Fine H-Position Color Reset Color Control Sharpness V-Position Gamma H-Position Transparency V-Position Display Time Picture
  • Samsung 740T | User Manual (ENGLISH) - Page 68
    Menu Brightness Contrast Description You can use the on-screen menus to change the brightness according to personal preference. Direct Access Feature : When OSD is not on the screen, push the button to adjust brightness. You can use the on-screen menus to change the contrast according to personal
  • Samsung 740T | User Manual (ENGLISH) - Page 69
    Menu MagicColor Color Tone Color Control Gamma Description MagicColor is a new technology that Samsung has exclusively developed to improve digital image and to display natural color more clearly without disturbing image quality. Play/Stop 1) Off - Returns to the original mode. 2) Demo - The
  • Samsung 740T | User Manual (ENGLISH) - Page 70
    Changes the clearance of image. (Not available in MagicColor mode of Full and Intelligent.) Changes the horizontal position of the monitor's entire display. (Available in analog mode only) Changes the vertical position of the monitor's entire display. (Available in analog mode only) Play/Stop OSD
  • Samsung 740T | User Manual (ENGLISH) - Page 71
    Play/Stop Language H-Position V-Position Transparency Display Time Note:The language chosen affects only the language of the OSD. It has no effect on any software running on the computer. You can change the horizontal position where the OSD menu appears on your monitor. You can change the vertical
  • Samsung 740T | User Manual (ENGLISH) - Page 72
    Menu Image Reset Color Reset Description Image parameters are replaced with the factory default values. Color parameters are replaced with the factory default values. Play/Stop Information Menu Information Description Shows a video source, display mode on the OSD screen.
  • Samsung 740T | User Manual (ENGLISH) - Page 73
    SyncMaster 940Fn 1. [ ]Opens the on-screen menu and exits from the menu or closes the adjustment menu. 2. [ ]This button allows you to adjust items in the
  • Samsung 740T | User Manual (ENGLISH) - Page 74
    screen appears as shown in the animated screen on the center. Auto adjustment allows the monitor to self-adjust to the incoming video signal. The values of fine, coarse and position more accuracy. - If you change resolution in the control panel, auto function will be executed automatically. Locked
  • Samsung 740T | User Manual (ENGLISH) - Page 75
    the "MENU" button more than 5 seconds, OSD function is locked (unlocked). You can also adjust the brightness and contrast of the monitor with the OSD adjustment locking feature. MagicBright™ Menu Description Push the MagicBright button to circle through available preconfigured MagicBright™ modes
  • Samsung 740T | User Manual (ENGLISH) - Page 76
    Brightness Menu Brightness Description When OSD is not on the screen, push the button to adjust brightness. SOURCE Menu SOURCE Description Selects the video signal while the OSD is off.
  • Samsung 740T | User Manual (ENGLISH) - Page 77
    Auto Source Contrast Color Tone Fine H-Position Image Reset Color Control Sharpness V-Position Color Reset Gamma H-Position Transparency Priority V-Position Display Time Picture Menu Brightness Contrast Description You can use the on-screen menus to change the brightness according to personal
  • Samsung 740T | User Manual (ENGLISH) - Page 78
    Menu MagicColor Description MagicColor is a new technology that Samsung has exclusively developed to improve digital image and to display natural color more clearly without disturbing image quality. Play/Stop 1) Off - Returns to the original mode. 2) Demo - The screen before applying MagicColor
  • Samsung 740T | User Manual (ENGLISH) - Page 79
    ). (Available in analog mode only) Changes the clearance of image. (Not available in MagicColor mode of Full and Intelligent.) Changes the horizontal position of the monitor's entire display. (Available in analog mode only) Changes the vertical position of the
  • Samsung 740T | User Manual (ENGLISH) - Page 80
    one of eight languages. Play/Stop Language H-Position V-Position Transparency Display Time Note:The language chosen affects only the language of the OSD OSD menu appears on your monitor. You can change the vertical position where the OSD menu appears on your monitor. Change the transparency of the
  • Samsung 740T | User Manual (ENGLISH) - Page 81
    Menu Auto Source Image Reset Color Reset Priority Description Select Auto Source for the monitor to automatically select the signal source. Image parameters are replaced with the factory default values. Color parameters are replaced with the factory default values. This
  • Samsung 740T | User Manual (ENGLISH) - Page 82
    Menu Information Description Shows a video source, display mode on the OSD screen.
  • Samsung 740T | User Manual (ENGLISH) - Page 83
    SyncMaster 540B / 740T / 940T / 940Be 1. [ ]Opens the on-screen menu and exits from the menu or closes the adjustment menu. 2. [ ]This button allows you to adjust items in
  • Samsung 740T | User Manual (ENGLISH) - Page 84
    screen appears as shown in the animated screen on the center. Auto adjustment allows the monitor to self-adjust to the incoming video signal. The values of fine, coarse and position more accuracy. - If you change resolution in the control panel, auto function will be executed automatically. Locked
  • Samsung 740T | User Manual (ENGLISH) - Page 85
    the "MENU" button more than 5 seconds, OSD function is locked (unlocked). You can also adjust the brightness and contrast of the monitor with the OSD adjustment locking feature. MagicBright™ Menu Description Push the MagicBright button to circle through available preconfigured MagicBright™ modes
  • Samsung 740T | User Manual (ENGLISH) - Page 86
    Brightness Menu Brightness Description When OSD is not on the screen, push the button to adjust brightness. SOURCE Menu SOURCE Description Selects the video signal while the OSD is off.
  • Samsung 740T | User Manual (ENGLISH) - Page 87
    Language Auto Source Contrast Color Tone Fine H-Position Image Reset Color Control Sharpness V-Position Color Reset Gamma H-Position Transparency V-Position Display Time Picture Menu Brightness Contrast Description You can use the on-screen menus to change the brightness according to personal
  • Samsung 740T | User Manual (ENGLISH) - Page 88
    Menu MagicColor Description MagicColor is a new technology that Samsung has exclusively developed to improve digital image and to display natural color more clearly without disturbing image quality. Play/Stop 1) Off - Returns to the original mode. 2) Demo - The screen before applying MagicColor
  • Samsung 740T | User Manual (ENGLISH) - Page 89
    ). (Available in analog mode only) Changes the clearance of image. (Not available in MagicColor mode of Full and Intelligent.) Changes the horizontal position of the monitor's entire display. (Available in analog mode only) Changes the vertical position of the
  • Samsung 740T | User Manual (ENGLISH) - Page 90
    one of eight languages. Play/Stop Language H-Position V-Position Transparency Display Time Note:The language chosen affects only the language of the OSD OSD menu appears on your monitor. You can change the vertical position where the OSD menu appears on your monitor. Change the transparency of the
  • Samsung 740T | User Manual (ENGLISH) - Page 91
    Menu Auto Source Image Reset Color Reset Description Select Auto Source for the monitor to automatically select the signal source. Image parameters are replaced with the factory default values. Color parameters are replaced with the factory default values. Play/Stop Information
  • Samsung 740T | User Manual (ENGLISH) - Page 92
    Menu Information Description Shows a video source, display mode on the OSD screen.
  • Samsung 740T | User Manual (ENGLISH) - Page 93
    SyncMaster 540N 1. [ ]Opens the on-screen menu and exits from the menu or closes the adjustment menu. 2. [ ]This button allows you to adjust items in the
  • Samsung 740T | User Manual (ENGLISH) - Page 94
    screen appears as shown in the animated screen on the center. Auto adjustment allows the monitor to self-adjust to the incoming video signal. The values of fine, coarse and position more accuracy. - If you change resolution in the control panel, auto function will be executed automatically. Locked
  • Samsung 740T | User Manual (ENGLISH) - Page 95
    the "MENU" button more than 5 seconds, OSD function is locked (unlocked). You can also adjust the brightness and contrast of the monitor with the OSD adjustment locking feature. MagicBright™ Menu Description Push the MagicBright button to circle through available preconfigured MagicBright™ modes
  • Samsung 740T | User Manual (ENGLISH) - Page 96
    Image OSD Setup Information Brightness MagicColor Coarse Language Image Reset Contrast Color Tone Fine H-Position Color Reset Color Control Sharpness V-Position Gamma H-Position Transparency V-Position Display Time Picture
  • Samsung 740T | User Manual (ENGLISH) - Page 97
    Menu Brightness Contrast Description You can use the on-screen menus to change the brightness according to personal preference. Direct Access Feature : When OSD is not on the screen, push the button to adjust brightness. You can use the on-screen menus to change the contrast according to personal
  • Samsung 740T | User Manual (ENGLISH) - Page 98
    Menu MagicColor Color Tone Color Control Gamma Description MagicColor is a new technology that Samsung has exclusively developed to improve digital image and to display natural color more clearly without disturbing image quality. Play/Stop 1) Off - Returns to the original mode. 2) Demo - The
  • Samsung 740T | User Manual (ENGLISH) - Page 99
    Changes the clearance of image. (Not available in MagicColor mode of Full and Intelligent.) Changes the horizontal position of the monitor's entire display. (Available in analog mode only) Changes the vertical position of the monitor's entire display. (Available in analog mode only) Play/Stop OSD
  • Samsung 740T | User Manual (ENGLISH) - Page 100
    Play/Stop Language H-Position V-Position Transparency Display Time Note:The language chosen affects only the language of the OSD. It has no effect on any software running on the computer. You can change the horizontal position where the OSD menu appears on your monitor. You can change the vertical
  • Samsung 740T | User Manual (ENGLISH) - Page 101
    Menu Image Reset Color Reset Description Image parameters are replaced with the factory default values. Color parameters are replaced with the factory default values. Play/Stop Information Menu Information Description Shows a video source, display mode on the OSD screen.
  • Samsung 740T | User Manual (ENGLISH) - Page 102
    a software utility that guides you through the tuning process with easy to understand instructions and back ground patterns designed for each monitor control. Basic Functionality MagicTune™ is a software utility that allows monitor adjustment and color tuning using the Display Data Channel Command
  • Samsung 740T | User Manual (ENGLISH) - Page 103
    The OSD mode allows easy adjustment of monitor settings without taking pre-defined steps. You can access the desired menu item to set with ease.
  • Samsung 740T | User Manual (ENGLISH) - Page 104
    of computer system or monitor. If that happens, press F5 Key. Installation Problems The installation of MagicTune™ can be affected by such factors as the video card, motherboard and the network environment. See "Troubleshooting" if you have trouble during installation. System Requirements OS
  • Samsung 740T | User Manual (ENGLISH) - Page 105
    z Windows™ 2000 z Windows™ XP Home Edition z Windows™ XP Professional It is recommended using MagicTune™ in Windows™ 2000 or later. Hardware z 32 MB Memory above z 60 MB Hard disk space above * For more information, visit the MagicTune™ website.
  • Samsung 740T | User Manual (ENGLISH) - Page 106
    Color Overview | Installation | OSD Mode | | Uninstall | Troubleshooting Calibration MagicTune™ allows for quick accurate tuning of the display with the ability to easily save and use monitor configurations that are best suited for you. z OSD mode may appear inconsistent with the explanation in
  • Samsung 740T | User Manual (ENGLISH) - Page 107
    Allows the user to Determines the crispness of the images. Resolution Lists all display resolutions supported by the program. MagicBright™ is MagicBright control mode will be different according to monitor models. Some monitor will only support Four modes(Text, Internet, Entertain, Custom)
  • Samsung 740T | User Manual (ENGLISH) - Page 108
    monitor models. Some monitor will only support Four modes( Warm, Normal, Cool, Custom) Color Control Adjusts of the monitor image color. You can change the monitor is a new technology that Samsung has exclusively developed to improve digital image and to display natural color more clearly without
  • Samsung 740T | User Manual (ENGLISH) - Page 109
    models. MagicZone mode will show if the monitor supports the function. Color Innovation function provides optimized color for personal favor to view effectively with WCG-CCFL which was applied to Samsung Electronics for the first time. Color Innovation z Brilliant : If you select "Brilliant
  • Samsung 740T | User Manual (ENGLISH) - Page 110
    the Horizontal Control menu. z Auto Setup : Auto adjustment allows the monitor to self-adjust to the incoming video signal. The values of fine ™ menus, click the icon on the [task tray menu]. The menus are not displayed if the [Enable System Tray] is deselected in [Options] ' [Basic Settings].
  • Samsung 740T | User Manual (ENGLISH) - Page 111
    ColorTone Support Tab Definition Shows the Asset ID and the version number of the program, and allows you to use the Help feature. Help Visit the MagicTune™ website or click to open the Help files (User Manual) if you need any help installing or running MagicTune™ . The User Manual opens within
  • Samsung 740T | User Manual (ENGLISH) - Page 112
    server to control the Client monitor. (Server program should be installed to use this program as Client) When selecting the Customize checkbox at the bottom you can enter your personal information. User Name Shows the user name that is registered in PC. User ID Shows the user ID that is register
  • Samsung 740T | User Manual (ENGLISH) - Page 113
    Installation | OSD Mode | | Uninstall | Troubleshooting Calibration Color Calibration 1. Color Calibration Color Calibration guides you to get optimal color condition for your monitor. Proceed following 5steps for getting optimal monitor : Press Multi User button on main screen to select
  • Samsung 740T | User Manual (ENGLISH) - Page 114
    The above picture will be shown. 1. Press "View Calibrated" button to see the calibration effect which you adjusted. 2. Press "View Uncalibrated" button to see the original image.
  • Samsung 740T | User Manual (ENGLISH) - Page 115
    Color Overview | Installation | OSD Mode | | Uninstall | Troubleshooting Calibration Uninstall The MagicTune™ program can be removed only Uninstall Complete" dialog box appears. Visit the MagicTune™ website for technical support for MagicTune™ , FAQs (questions and answers) and software upgrades.
  • Samsung 740T | User Manual (ENGLISH) - Page 116
    video card driver or the graphics chip even when the video card is in the list. Please visit our homepage to see the Troubleshooting section. Check if your monitor is manufactured by Samsung. Products from other manufacturers may cause errors. Only Samsung products are able to support this feature
  • Samsung 740T | User Manual (ENGLISH) - Page 117
    to the User Guide for the optimal resolution. If you do not adjust to the optimal resolution and perform Color Calibration, the monitor cannot be adjusted to the optimal condition. Refer to the manual for the optimal resolution. This video card does not support MagicTune™ . Please install a new
  • Samsung 740T | User Manual (ENGLISH) - Page 118
    of Samsung CDT monitors support the Highlight feature. When using both the Highlight feature and MagicTune™ simultaneously, conflicts occur, which cause errors. Make sure to turn OFF Highlight before using MagicTune™ . Troubleshooting z MagicTune™ may not work in case monitor is replaced or driver
  • Samsung 740T | User Manual (ENGLISH) - Page 119
    reboot the computer for it to operate normally after installing or removing the program. z Visit the MagicTune™ website for technical support for MagicTune™ , FAQs (questions and answers) and software upgrades. z Visit the MagicTune™ website and download the installation software for MagicTune™ MAC.
  • Samsung 740T | User Manual (ENGLISH) - Page 120
    Overview | Installation | Interface | Uninstall | Troubleshooting Overview What is MagicRotation? Traditionally, computer displays allowed the user to view only in landscape mode. In today's information age, more users need to view documents, web pages, emails, etc. in there day to day life.
  • Samsung 740T | User Manual (ENGLISH) - Page 121
    Overview | Installation | Interface | Uninstall | Troubleshooting Installation 1. Insert the installation CD into the CD-ROM drive. 2. Click the MagicRotation installation file. 3. Select installation Language, Click "Next". 4. When the InstallShield Wizard window appears, click "Next." 5.
  • Samsung 740T | User Manual (ENGLISH) - Page 122
    6. Choose a folder to install the MagicRotation program. 7. Click "Install." 8. The "Setup Status" window appears.
  • Samsung 740T | User Manual (ENGLISH) - Page 123
    appears on your desktop. Installation Problems The installation of MagicRotation can be affected by the factors such as video card, motherboard and the network environment. See "Troubleshooting" if you have trouble during installation. Limitation 1. The "Display Driver" should be properly loaded
  • Samsung 740T | User Manual (ENGLISH) - Page 124
    this should fix the problem. 3. User Applications using OpenGL and DirectDraw supported in Windows™ 98, ME, NT 4.0. 6. MagicRotation does not provide support Service Packs z It is recommended that your System has the latest Service Pack installed. z For Windows™ NT 4.0, it is recommended to install
  • Samsung 740T | User Manual (ENGLISH) - Page 125
    Overview | Installation | Interface | Uninstall | Troubleshooting z When Rotation is functioning, portion of MagicTune™ program may not operate normally. z AutoRotation : The screens display will automatically rotate when the monitor is rotated. To execute Auto Rotation, it should be done as below
  • Samsung 740T | User Manual (ENGLISH) - Page 126
    Rotate to 90 : Display will be rotated 90 degrees from the current angle. Rotate to 180 : Display will be rotated 180 degrees from the current angle.
  • Samsung 740T | User Manual (ENGLISH) - Page 127
    Rotate to 270 : Display will be rotated 270 degrees from the current angle. Hot key : Hot Keys are available by default and can be changed by user. It can be assigned by user directly with keyboard after changing the existing HotKey . User can create the hot key with the combination of Shift, Ctrl,
  • Samsung 740T | User Manual (ENGLISH) - Page 128
  • Samsung 740T | User Manual (ENGLISH) - Page 129
    Overview | Installation | Interface | Uninstall | Troubleshooting Uninstall The MagicRotation program can be removed only the system to complete the uninstallation. Visit the MagicRotation website for technical support for MagicRotation, FAQs (questions and answers) and software upgrades. *
  • Samsung 740T | User Manual (ENGLISH) - Page 130
    Overview | Installation | Interface | Uninstall | Troubleshooting Troubleshooting Before You Call Technical Support z MagicRotation Software works with the installed "Display Driver" supplied by your Graphic Card Vendor to provide screen rotation capabilities. If the installed "Display Driver" is
  • Samsung 740T | User Manual (ENGLISH) - Page 131
    , contact the Service Center or your dealer. You can see this message when the signal from the video card exceeds the maximum resolution and frequency that the monitor can handle properly. Adjust the maximum resolution and frequency that the monitor can handle properly. If the display exceeds SXGA
  • Samsung 740T | User Manual (ENGLISH) - Page 132
    or just black and white. Is the screen displaying only one manual. The screen suddenly has become unbalanced. Have you changed the Adjust screen image position and video card or the driver? size using the OSD. Have you adjusted the resolution or frequency to the monitor? Adjust the resolution
  • Samsung 740T | User Manual (ENGLISH) - Page 133
    Have you installed the monitor driver? Install the monitor driver according to the Driver Installation Instructions. See the video card manual to see if the Plug & Play (VESA DDC) function can be supported. Install the monitor driver according to the Driver Installation Instructions. Check when
  • Samsung 740T | User Manual (ENGLISH) - Page 134
    video card. Note that video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.) How can I adjust the resolution? Windows ME/XP/2000 : Set the resolution at the Control Panel¡ Display¡ Settings. * Contact the video card
  • Samsung 740T | User Manual (ENGLISH) - Page 135
    the computer. Therefore, if there is trouble with the computer or the video card, this can cause the monitor to become blank, have poor coloring, noise, Video mode not supported, etc. In this case, first check the source of the problem, and then contact the Service Center or your dealer. z Judging
  • Samsung 740T | User Manual (ENGLISH) - Page 136
    this message when the signal from the video card exceeds the maximum resolution and frequency that the monitor can handle properly. Adjust the maximum resolution and frequency that the monitor can handle properly. If the display exceeds SXGA or 75 Hz, a "Not Optimum Mode","Recommended Mode 1280
  • Samsung 740T | User Manual (ENGLISH) - Page 137
    Have you installed the monitor driver? Install the monitor driver according to the Driver Installation Instructions. See the video card manual to see if the Plug & Play (VESA DDC) function can be supported. Install the monitor driver according to the Driver Installation Instructions. Check when
  • Samsung 740T | User Manual (ENGLISH) - Page 138
    (video) driver and the monitor driver. 4. Check if the scanning ratio of the video screen is set at 56 Hz ~ 75 Hz. (Do not exceed 75 Hz when using the maximum resolution.) 5. If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove the Display Adapter at
  • Samsung 740T | User Manual (ENGLISH) - Page 139
    the computer. Therefore, if there is trouble with the computer or the video card, this can cause the monitor to become blank, have poor coloring, noise, Video mode not supported, etc. In this case, first check the source of the problem, and then contact the Service Center or your dealer. z Judging
  • Samsung 740T | User Manual (ENGLISH) - Page 140
    1024 60 Hz" message comes up, disconnect the cable from the computer while the monitor is still powered on. { If there is a message coming up on the screen or if the screen goes white, this means the monitor is in working condition. { In this case, check the computer for trouble.
  • Samsung 740T | User Manual (ENGLISH) - Page 141
    SyncMaster 940Fn Check List Before calling for assistance, check the information in this section to see if you can remedy any problems resolution and frequency that the monitor can handle properly. Adjust the maximum resolution and frequency that the monitor can handle properly. If the display
  • Samsung 740T | User Manual (ENGLISH) - Page 142
    shows strange colors or just black and white. Is the screen displaying only one color as if driver? Have you adjusted the resolution or frequency to the monitor? Set the video card by referring to the video card manual. Adjust screen image position and size using the OSD. Adjust the resolution
  • Samsung 740T | User Manual (ENGLISH) - Page 143
    Have you installed the monitor driver? Install the monitor driver according to the Driver Installation Instructions. See the video card manual to see if the Plug & Play (VESA DDC) function can be supported. Install the monitor driver according to the Driver Installation Instructions. Check when
  • Samsung 740T | User Manual (ENGLISH) - Page 144
    video card. Note that video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.) How can I adjust the resolution? Windows ME/XP/2000 : Set the resolution at the Control Panel¡ Display¡ Settings. * Contact the video card
  • Samsung 740T | User Manual (ENGLISH) - Page 145
    the computer. Therefore, if there is trouble with the computer or the video card, this can cause the monitor to become blank, have poor coloring, noise, Video mode not supported, etc. In this case, first check the source of the problem, and then contact the Service Center or your dealer. z Judging
  • Samsung 740T | User Manual (ENGLISH) - Page 146
    Model Name SyncMaster 740B LCD Panel Size 17 " Diagonal (43 cm) Display area 337.92 mm (H) x 270.336 mm (V) Pixel Pitch 0.264 mm (H) x 0.264 mm (V) Synchronization Horizontal 30 ~ 81 k Hz Vertical 56 ~ 75 Hz Display Color 16.2 M Colors Resolution Optimum resolution 1280 x 1024
  • Samsung 740T | User Manual (ENGLISH) - Page 147
    monitor settings. In most cases, the monitor installation will proceed automatically, unless the user wishes to select alternate settings. Dot Acceptable TFT LCD black pixels may be seen. This is not from bad quality and you can use it without any problelms. z For example, the number of TFT LCD
  • Samsung 740T | User Manual (ENGLISH) - Page 148
    monitor is EPA ENERGY STAR® compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPMS functionality. As an ENERGY STAR® Partner, SAMSUNG Refer to the video card manual and adjust the screen as follows. Table 1. Preset Timing Modes Display Mode Horizontal Frequency (kHz)
  • Samsung 740T | User Manual (ENGLISH) - Page 149
    many times per second to display an image to the user. The frequency of this repetition is called the Vertical Frequency or Refresh Rate. Unit: Hz
  • Samsung 740T | User Manual (ENGLISH) - Page 150
    Model Name SyncMaster 940B LCD Panel Size 19 " Diagonal (48 cm) Display area 376.32 mm (H) x 301.056 mm (V) Pixel Pitch 0.294 mm (H) x 0.294 mm (V) Synchronization Horizontal 30 ~ 81 k Hz Vertical 56 ~ 75 Hz Display Color 16.7 M Colors Resolution Optimum resolution 1280 x 1024
  • Samsung 740T | User Manual (ENGLISH) - Page 151
    monitor settings. In most cases, the monitor installation will proceed automatically, unless the user wishes to select alternate settings. Dot Acceptable TFT LCD black pixels may be seen. This is not from bad quality and you can use it without any problelms. z For example, the number of TFT LCD
  • Samsung 740T | User Manual (ENGLISH) - Page 152
    monitor is EPA ENERGY STAR® compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPMS functionality. As an ENERGY STAR® Partner, SAMSUNG Refer to the video card manual and adjust the screen as follows. Table 1. Preset Timing Modes Display Mode Horizontal Frequency (kHz)
  • Samsung 740T | User Manual (ENGLISH) - Page 153
    many times per second to display an image to the user. The frequency of this repetition is called the Vertical Frequency or Refresh Rate. Unit: Hz
  • Samsung 740T | User Manual (ENGLISH) - Page 154
    Model Name SyncMaster 740N LCD Panel Size 17 " Diagonal (43 cm) Display area 337.92 mm (H) x 270.336 mm (V) Pixel Pitch 0.264 mm (H) x 0.264 mm (V) Synchronization Horizontal 30 ~ 81 k Hz Vertical 56 ~ 75 Hz Display Color 16.2 M Colors Resolution Optimum resolution 1280 x 1024
  • Samsung 740T | User Manual (ENGLISH) - Page 155
    monitor settings. In most cases, the monitor installation will proceed automatically, unless the user wishes to select alternate settings. Dot Acceptable TFT LCD ) Power off (Power Switch) Black Black Less than 1 W (120 Vac / 220 Vac) Less than 0 W This monitor is EPA ENERGY STAR® compliant
  • Samsung 740T | User Manual (ENGLISH) - Page 156
    SAMSUNG manual and adjust the screen as follows. Table 1. Preset Timing Modes Display Mode Horizontal Frequency (kHz) IBM, 640 x 350 31.469 IBM, 640 x 480 31.469 IBM, 720 x 400 31.469 MAC, 640 x 480 35.000 MAC, 832 x 624 49.726 MAC lamp, the screen has to repeat the same image
  • Samsung 740T | User Manual (ENGLISH) - Page 157
    many times per second to display an image to the user. The frequency of this repetition is called the Vertical Frequency or Refresh Rate. Unit: Hz
  • Samsung 740T | User Manual (ENGLISH) - Page 158
    Model Name SyncMaster 940Fn LCD Panel Size 19 " Diagonal (48 cm) Display area 376.32 mm (H) x 301.056 mm (V) Pixel Pitch 0.294 mm (H) x 0.294 mm (V) Synchronization Horizontal 30 ~ 81 k Hz Vertical 56 ~ 75 Hz Display Color 16.7 M Colors Resolution Optimum resolution 1280 x 1024
  • Samsung 740T | User Manual (ENGLISH) - Page 159
    systems will provide the best operating conditions and monitor settings. In most cases, the monitor installation will proceed automatically, unless the user wishes to select alternate settings. Dot Acceptable TFT LCD panels manufactured by using advanced semiconductor technology with precision
  • Samsung 740T | User Manual (ENGLISH) - Page 160
    Modes Display Mode Horizontal Frequency (kHz) IBM, 640 x 350 31.469 IBM, 640 x 480 31.469 IBM, 720 x 400 31.469 MAC, 640 x 480 35.000 MAC, 832 x 624 49.726 MAC, a fluorescent lamp, the screen has to repeat the same image many times per second to display an image to the user. The
  • Samsung 740T | User Manual (ENGLISH) - Page 161
    General Model Name SyncMaster 540B LCD Panel Size 15 " Diagonal (38 cm) Display area 304.1 mm (H) x 228.1 mm (V) Pixel Pitch 0.297 mm (H) x 0.297 mm (V) Synchronization Horizontal 30 ~ 61 k Hz Vertical 56 ~ 75 Hz Display Color 16.2 M Colors Resolution Optimum resolution 1024 x 768
  • Samsung 740T | User Manual (ENGLISH) - Page 162
    systems will provide the best operating conditions and monitor settings. In most cases, the monitor installation will proceed automatically, unless the user wishes to select alternate settings. Dot Acceptable TFT LCD panels manufactured by using advanced semiconductor technology with precision
  • Samsung 740T | User Manual (ENGLISH) - Page 163
    power LED is on. Refer to the video card manual and adjust the screen as follows. Table 1. Preset Timing Modes Display Mode Horizontal Frequency (kHz) IBM, 640 x 350 a fluorescent lamp, the screen has to repeat the same image many times per second to display an image to the user. The frequency
  • Samsung 740T | User Manual (ENGLISH) - Page 164
    General Model Name SyncMaster 540N LCD Panel Size 15 " Diagonal (38 cm) Display area 304.1 mm (H) x 228.1 mm (V) Pixel Pitch 0.297 mm (H) x 0.297 mm (V) Synchronization Horizontal 30 ~ 61 k Hz Vertical 56 ~ 75 Hz Display Color 16.2 M Colors Resolution Optimum resolution 1024 x 768
  • Samsung 740T | User Manual (ENGLISH) - Page 165
    systems will provide the best operating conditions and monitor settings. In most cases, the monitor installation will proceed automatically, unless the user wishes to select alternate settings. Dot Acceptable TFT LCD panels manufactured by using advanced semiconductor technology with precision
  • Samsung 740T | User Manual (ENGLISH) - Page 166
    power LED is on. Refer to the video card manual and adjust the screen as follows. Table 1. Preset Timing Modes Display Mode Horizontal Frequency (kHz) IBM, 640 x 350 a fluorescent lamp, the screen has to repeat the same image many times per second to display an image to the user. The frequency
  • Samsung 740T | User Manual (ENGLISH) - Page 167
    Model Name SyncMaster 740T LCD Panel Size 17 " Diagonal (43 cm) Display area 337.92 mm (H) x 270.336 mm (V) Pixel Pitch 0.264 mm (H) x 0.264 mm (V) Synchronization Horizontal 30 ~ 81 k Hz Vertical 56 ~ 75 Hz Display Color 16.2 M Colors Resolution Optimum resolution 1280 x 1024
  • Samsung 740T | User Manual (ENGLISH) - Page 168
    monitor settings. In most cases, the monitor installation will proceed automatically, unless the user wishes to select alternate settings. Dot Acceptable TFT LCD ) Power off (Power Switch) Black Black Less than 1 W (120 Vac / 220 Vac) Less than 0 W This monitor is EPA ENERGY STAR® compliant
  • Samsung 740T | User Manual (ENGLISH) - Page 169
    card manual and adjust the screen as follows. Table 1. Preset Timing Modes Display Mode Horizontal Frequency (kHz) IBM, 640 x 350 31.469 IBM, 640 x 480 31.469 IBM, 720 x 400 31.469 MAC, 640 x 480 35.000 MAC, 832 x 624 49.726 MAC lamp, the screen has to repeat the same image
  • Samsung 740T | User Manual (ENGLISH) - Page 170
    many times per second to display an image to the user. The frequency of this repetition is called the Vertical Frequency or Refresh Rate. Unit: Hz
  • Samsung 740T | User Manual (ENGLISH) - Page 171
    Model Name SyncMaster 940T LCD Panel Size 19 " Diagonal (48 cm) Display area 376.32 mm (H) x 301.056 mm (V) Pixel Pitch 0.294 mm (H) x 0.294 mm (V) Synchronization Horizontal 30 ~ 81 k Hz Vertical 56 ~ 75 Hz Display Color 16.7 M Colors Resolution Optimum resolution 1280 x 1024
  • Samsung 740T | User Manual (ENGLISH) - Page 172
    monitor settings. In most cases, the monitor installation will proceed automatically, unless the user wishes to select alternate settings. Dot Acceptable TFT LCD ) Power off (Power Switch) Black Black Less than 1 W (120 Vac / 220 Vac) Less than 0 W This monitor is EPA ENERGY STAR® compliant
  • Samsung 740T | User Manual (ENGLISH) - Page 173
    card manual and adjust the screen as follows. Table 1. Preset Timing Modes Display Mode Horizontal Frequency (kHz) IBM, 640 x 350 31.469 IBM, 640 x 480 31.469 IBM, 720 x 400 31.469 MAC, 640 x 480 35.000 MAC, 832 x 624 49.726 MAC lamp, the screen has to repeat the same image
  • Samsung 740T | User Manual (ENGLISH) - Page 174
    many times per second to display an image to the user. The frequency of this repetition is called the Vertical Frequency or Refresh Rate. Unit: Hz
  • Samsung 740T | User Manual (ENGLISH) - Page 175
    Model Name SyncMaster 940N LCD Panel Size 19 " Diagonal (48 cm) Display area 376.32 mm (H) x 301.056 mm (V) Pixel Pitch 0.294 mm (H) x 0.294 mm (V) Synchronization Horizontal 30 ~ 81 k Hz Vertical 56 ~ 75 Hz Display Color 16.7M Colors Resolution Optimum resolution 1280 x 1024
  • Samsung 740T | User Manual (ENGLISH) - Page 176
    monitor settings. In most cases, the monitor installation will proceed automatically, unless the user wishes to select alternate settings. Dot Acceptable TFT LCD ) Power off (Power Switch) Black Black Less than 1 W (120 Vac / 220 Vac) Less than 0 W This monitor is EPA ENERGY STAR® compliant
  • Samsung 740T | User Manual (ENGLISH) - Page 177
    SAMSUNG manual and adjust the screen as follows. Table 1. Preset Timing Modes Display Mode Horizontal Frequency (kHz) IBM, 640 x 350 31.469 IBM, 640 x 480 31.469 IBM, 720 x 400 31.469 MAC, 640 x 480 35.000 MAC, 832 x 624 49.726 MAC lamp, the screen has to repeat the same image
  • Samsung 740T | User Manual (ENGLISH) - Page 178
    many times per second to display an image to the user. The frequency of this repetition is called the Vertical Frequency or Refresh Rate. Unit: Hz
  • Samsung 740T | User Manual (ENGLISH) - Page 179
    Model Name SyncMaster 940Be LCD Panel Size 19 " Diagonal (48 cm) Display area 376.32 mm (H) x 301.056 mm (V) Pixel Pitch 0.294 mm (H) x 0.294 mm (V) Synchronization Horizontal 30 ~ 81 k Hz Vertical 56 ~ 75 Hz Display Color 16.7 M Colors Resolution Optimum resolution 1280 x 1024
  • Samsung 740T | User Manual (ENGLISH) - Page 180
    systems will provide the best operating conditions and monitor settings. In most cases, the monitor installation will proceed automatically, unless the user wishes to select alternate settings. Dot Acceptable TFT LCD panels manufactured by using advanced semiconductor technology with precision
  • Samsung 740T | User Manual (ENGLISH) - Page 181
    power LED is on. Refer to the video card manual and adjust the screen as follows. Table 1. Preset Timing Modes Display Mode Horizontal Frequency (kHz) IBM, 640 x 350 a fluorescent lamp, the screen has to repeat the same image many times per second to display an image to the user. The frequency
  • Samsung 740T | User Manual (ENGLISH) - Page 182
    COSTA RICA ECUADOR EL SALVADOR GUATEMALA JAMAICA PANAMA PUERTO RICO REP. DOMINICA TRINIDAD & TOBAGO VENEZUELA Latin America 0800-333-3733 4004-0000 800-726-7864 (SAMSUNG) 01-8000112112 0-800-507-7267 1-800-10-7267 800-6225 1-800-299-0013 1-800-234-7267 800-7267 1-800-682-3180 1-800-751-2676 1-800
  • Samsung 740T | User Manual (ENGLISH) - Page 183
    OF IRELAND SLOVAKIA SPAIN SWEDEN SWITZERLAND U.K 38 322 887 09 693 79 554 08 25 3260 (€ 0,15/min) 01805 - 121213 (€ 0,14/Min) 06-80-SAMSUNG (7267864) 800 SAMSUNG (7267864) 02 261 03 710 0900 20 200 88 (€ 0,10/Min) 231 627 22 0 801 801 881 80 8 200 128 0818 717 100 0800
  • Samsung 740T | User Manual (ENGLISH) - Page 184
    /vn Middle East & Africa 0860 7267864 (SAMSUNG) 800SAMSUNG (7267864) 8000-4726 http://www.samsung.com/za http://www.samsung.com/mea Terms Dot Pitch The image on a monitor is composed of red, green and blue dots. The closer the dots, the higher the resolution. The distance between two dots of the
  • Samsung 740T | User Manual (ENGLISH) - Page 185
    -LCD. { Resolution: 1280 x 1024 { Vertical frequency (refresh rate): 60 Hz 2. TFT LCD black pixels may be seen. This is not from bad quality and you can use it without any problelms. { For example, the number of TFT LCD sub pixels contained in this product are 3,932,160. 3. When cleaning the monitor
  • Samsung 740T | User Manual (ENGLISH) - Page 186
    MÉXICO IMPORTADO POR: SAMSUNG ELECTRONICS MÉXICO. S.A. de C.V. Vía Lopez Portillo No. 6, Col. San Fco. Chilpan Tultitlán, Estado de México, C.P. 54940 Tel: 01-55-5747-5100 / 01-800-726-7864 EXPORTADO POR: Samsung Electronics CO.,LTD. 416, Mae tan-3dong, Yeongtong - gu, Suwon City, Gyeonggi-do
  • Samsung 740T | User Manual (ENGLISH) - Page 187
    LCD Monitors and TVs may have image retention when switching from one image to another especially after displaying a stationary image for a long time. This guide is to demonstrate correct usage of LCD z Avoid: Colors with big difference in luminance (Black & White, Grey) Ex) z Recommended settings:
  • Samsung 740T | User Manual (ENGLISH) - Page 188
    Ex) The best way to protect your monitor from Image retention is to set your PC or System to operate a Screen Saver program when you are not using it. Image retention may not occur when a LCD panel is operated under normal conditions. Normal conditions are defined as continuously changing video
  • Samsung 740T | User Manual (ENGLISH) - Page 189
    this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
Install drivers
Install programs
SyncMaster 740B / 940B / 740N / 940Fn / 540B / 540N / 740T / 940T / 940N / 940Be