Samsung DV45K7600GW/A3 User Manual - Page 22
Using the short hose as an extension, short hose B, Y connector A, water, hoses C
View all Samsung DV45K7600GW/A3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Installation Installation Using the short hose as an extension B A C 1. Close the cold water tap. If you have a washer cold water hose attached to the cold water faucet, unscrew and remove the hose. Then, connect the short hose (B) to the cold water tap. Turn the coupling manually until it is tight. 2. Using pliers, tighten the coupling an additional two-thirds turn. Do not overtighten because the coupling may be damaged. 3. Connect the Y connector (A) to the brass male end of the short hose. Turn the coupling manually until it is tight. 4. Using pliers, tighten the coupling an additional two-thirds turn. Do not overtighten because the coupling may be damaged. 5. Connect the angled end of the water hoses (C) to the filling valve at the bottom of the rear frame. Turn the coupling manually until it is tight. 6. Using pliers, tighten the coupling an additional two-thirds turn. Do not overtighten because the coupling may be damaged. 7. If you detached the cold water hose from your washer, attach the hose to the free end of the Y connector, tighten the coupling until it is tight, and then, using a pliers, tighten an additional two-thirds turn. 8. Open the cold water tap, and then check for any leaks. 22 English DV7700K-03170U-01_EN (US).indd 22 2015-12-29 12:08:28