Samsung DVD-V8500 User Manual (user Manual) (ver.1.0) (English) - Page 15

CONNECTIONS Connection to a TV (Interlace) - Connecting to your TV using Component video cables. - You will enjoy high quality and accurate color reproduction images. Component video separates the picture element into black and white(Y), blue(PB), red(PR) signals to present clear and clean images. (Audio signals are delivered through the audio output.) 1 Using component video cables (not included), connect the COMPONENT VIDEO OUT terminal on the rear of the DVD-VCR to the COMPONENT IN terminal of your TV. 2 Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD-VCR to the AUDIO (red and white) IN terminals of your TV. Turn on the DVD-VCR and TV. 3 With the unit in stop mode, set the Alt video output to Component: Interlace in the Display Setup menu (see pages 58~59) or press the P.SCAN button on the front panel until Interlace is output. 4 Press the input selector on your TV remote control until the Component signal from the DVDVCR appears on the TV screen. White Red Green Audio Cable Blue Red Component Cable (not included) Red Red White Blue Green Notes - If Video output is incorrectly set to S-Video with the Component cables connected, the screen will turn red. - If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 17 to 18) - The component terminal of your TV may be marked "R-Y, B-Y, Y" or "Cr, Cb, Y" instead of "PR, PB, Y" depending on the manufacturer. The number and position of terminals may vary depending on the TV set. Please refer to the user's manual of your TV. ENG-15