Samsung DVD-V8500 User Manual (user Manual) (ver.1.0) (English) - Page 18
Connection to an Audio System (Dolby digital, MPEG2 or DTS, DIGITAL AUDIO OUT COAXIAL, DIGITAL - no disc
View all Samsung DVD-V8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
CONNECTIONS Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier) 1 Using a coaxial cable (not included), connect the DIGITAL AUDIO OUT (COAXIAL) or DIGITAL AUDIO OUT (OPTICAL) terminal on the rear of the DVD-VCR to the DIGITAL AUDIO IN (COAXIAL) or DIGITAL AUDIO OUT (OPTICAL) terminal of the Amplifier. 2 Using the video signal cable(s), connect the VIDEO, S-VIDEO or COMPONENT OUT terminals on the rear of the DVD-VCR to the VIDEO, S-VIDEO or COMPONENT IN terminal of your TV as described on pages 14 to 16. 3 Turn on the DVD-VCR, TV, and Amplifier. 4 Press the input select button of the Amplifier to select external input in order to hear sound from the DVD-VCR. Refer to your Amplifier's user manual to set the Amplifier's audio input. Coaxial Cable (not included) Dolby digital or DTS Amp. Notes - When you connect the DVD-VCR to DTS Amplifier and play a DTS disc, set the DTS to On in Audio Setup menu. If it is set to Off, sound will not be heard, or there will be a loud sound. - Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the speakers and your ears. - Please set the audio in the menu screen according to the Amplifier. (See pages 56 to 57) - The position of terminals may vary depending on the Amplifier. Please refer to the user's manual of the Amplifier. - Only audio from the DVD player can he heard when connection is made via the Optical or Coaxial jack. You must have the analog L and R Audio Out connected to hear VCR audio (see page 17). ENG-18