Samsung DVG54R7600V/A3 User Manual - Page 27
Using the short hose as an extension, short hose, Y-connector A, water, hoses C
View all Samsung DVG54R7600V/A3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Installation Using the short hose as an extension B A C 1. Close the cold water tap. If you have a washer's cold water hose attached to the cold water tap, unscrew and remove the hose. Then, connect the short hose (B) to the cold water tap. Turn the coupling by hand until it is tight. 2. Using pliers, tighten the coupling an additional two-thirds turn. Do not overtighten because the coupling may be damaged. 3. Connect the Y-connector (A) to the brass male end of the short hose. Turn the coupling by hand until it is tight. 4. Using pliers, tighten the coupling an additional two-thirds turn. Do not overtighten because the coupling may be damaged. 5. Connect the angled end of the water hoses (C) to the filling valve at the bottom of the rear frame. Turn the coupling manually until it is tight. 6. Using pliers, tighten the coupling an additional two-thirds turn. Do not overtighten because the coupling may be damaged. 7. If you detached the cold water hose from your washer, attach the hose to the free end of the Y-connector, tighten the coupling by hand until it is tight, and then, using a pliers, tighten an additional two-thirds turn. 8. Open the cold water tap, and then check for any leaks. Untitled-18 27 English 27 2020-07-14 3:40:07