Samsung FE-R300SW User Manual (user Manual) (ver.1.0) (English) - Page 37

Removing and replacing the oven door How to remove the door • The door is very heavy. Be careful when removing and lifting the door. Do not lift the door by the handle. • Turn the power OFF before removing the door. 1. Open the door completely. 2. Pull the hinge locks down toward the door frame to the unlocked position. 3. Firmly grasp both sides of the door at the top. Hinge lock Locked position Unlocked position 4. Close the door to the door removal position, which is approximately 5 degrees from vertical (Fig. 1). 5. Lift door up and out until the hinge arm is clear of the slot (Fig. 2). about 5° Fig. 1 Fig. 2 05 MAINTAINING YOUR APPLIANCE How to replace the door 1. Firmly grasp both sides of the door at the top. 2. With the door at the same angle as the removal position, slide the indentation of the hinge arm into the bottom edge of the hinge slot. The notch in the hinge arm must be fully inserted into the bottom of the slot. 3. Open the door fully. If the door will not open fully, the indentation is not inserted correctly in the bottom edge of the slot. 4. Push the hinge locks up against the front frame Hinge lock of the oven cavity to the locked position. Bottom edge of slot Hinge arm Indentation 5. Close the oven door. Locked position Unlocked position Removing and replacing the storage drawer How to remove the storage drawer 1. Pull the drawer out until it stops. 2. Lean the front of the drawer and pull out it until it stops. 3 Lift and pull the drawer out. Hook Hook How to replace the storage drawer 1. Put on the drawer side over both hook. 2. Push the drawer until it stops. 3. Lean and lift the drawer. 4. Naturally push the drawer. Maintaining your appliance _37