Samsung FE710DRS User Manual (user Manual) (ver.1.0) (English) - Page 69
Possible Cause
View all Samsung FE710DRS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
06 TROUBLESHOOTING PROBLEM Steam from the vent. Burning or oily odor coming from the vent. Strong odor. Fan noise. Oven racks are difficult to slide. Display goes blank. Display flashes. POSSIBLE CAUSE When using the convection feature, it is normal to see steam coming out of the oven vent. As the number of racks or the amount of food being cooked increases, the amount of visible steam will increase. This is normal in a new oven and will disappear in time. SOLUTION • This is normal. • To speed the process, set a self-cleaning cycle for a minimum of 3 hours. • See the section on self-cleaning on page 56. An odor from the insulation around • This is temporary. the inside of the oven is normal for the first few times the oven is used. A convection fan may automatically • This is normal. turn on and off. The shiny, silver-colored racks were cleaned in a self-cleaning cycle. • Apply a small amount of vegetable oil to a paper towel and wipe the edges of the oven racks with the paper towel. A fuse in your home may be blown • Replace the fuse or reset the circuit or the circuit breaker tripped. breaker. There was a power failure. • Reset the clock. Drawer does not slide smoothly or drags. The drawer is out of alignment. The drawer is over-loaded or the load is unbalanced. • Fully extend the drawer and push it all the way in. See page 64. • Reduce weight. Redistribute drawer contents. Warming drawer will A fuse in your home may be blown • Replace the fuse or reset the circuit not work. or the circuit breaker tripped. breaker. The controls are not set correctly. Excessive There is liquid present in the condensation in the drawer. drawer. Uncovered foods. • See the chapter on using the warming drawer starting on page 26. • Remove the liquid. • Cover food with a lid or aluminum foil. The temperature is set too high. • Adjust the temperature to a lower setting. Food dries out in Moisture is escaping. the warming drawer. The drawer is not fully closed. • Cover food with a lid or aluminum foil. • Push the drawer in until the latch engages. FE710DRS_XAA_DG68-00333A-01.indd 69 Troubleshooting _69 2011-03-16 �� 2:46:58