Samsung HC-P5252W Flash Guide (flash Manual) (English) - Page 26

BP68-00289A-00Eng 3/30/04 9:28 AM Page 26 OPERATION Memorizing the Channels Your TV can memorize and store all of the available channels for both "off-air" (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. Selecting the Video Signal Source Before your TV can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or a cable system). 1 Press the MENU button. Press the ... or † button to select "Channel", then press the ENTER button. T V Channel Antenna : Ant.1 √ Air/CATV : Air √ Auto Program √ Favorite Channels √ Fine Tune √ Add/Delete √ † More Move Enter Return 2 Press the ... or † button to select "Air/CATV", then press the ENTER button. Press the ... or † button to select "Air", "STD", "HRC" or "IRC", then press the ENTER button. Press the EXIT button to exit. T V Channel Antenna : Ant.1 √ Air/CATV : Air Air √ Auto Program STD √ Favorite Channels HRC √ Fine Tune IRC √ Add/Delete √ † More Move Enter Return œ If you are connected to an antenna, press the ... or † button to select "Air". œ If you connected cable, press the ... or † button to select the type of cable system: "STD", "HRC" or "IRC". • "STD", "HRC" and "IRC" identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected. Proceed to "Storing Channels in Memory". • Subscription cable services require service-specific requirement for viewing. 26