Samsung HC-P5252W Flash Guide (flash Manual) (English) - Page 8
Connection Jacks (Rear), Audio/Video Output jacks
View all Samsung HC-P5252W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
BP68-00289A-00Eng 3/30/04 9:28 AM Page 8 YOUR NEW TV Connection Jacks (Rear) Use the rear panel jacks to connect an A/V component that will be connected continuously, such as a VCR or a DVD player. For more information on connecting equipment, see pages 10~17. Œ Antenna terminals Two independent cables or antennas can be connected to these terminals. Use "ANT 1 IN" and "ANT 2 IN" terminals to receive a signal from VHF/ UHF antennas or your cable system. Use the"ANT 1 OUT" terminal to send the signal being received by the "ANT 1 IN" terminal out to another component (such as a Cable Set-Top Box). The PIP channel can be received only when a signal source is connected to "ANT 1 IN". ´ Audio/Video Output jacks Connect to the audio/video input jacks of a recording VCR. ˇ Video Input jacks Connect to the video output jacks of VCRs, DVD players and similar devices. ¨ Audio Input jacks Connect to the audio output jacks of VCRs, DVD players and similar devices. ˆ S-Video Input jack Connect to S-VIDEO output jacks of an S-VHS VCR or DVD player. Ø∏ COMPONENT Input jacks (Y, PB, PR, AUDIO-L/R) Connect to the audio and video outputs of DVD or DTV Set-Top Box. 480i/480p/1080i Y,PB and PR video signal outputs are available. " HDMI/DVI Video Input jack (High Definition Multimedia Interface) Connect to the HDMI jack for device with HDMI or DVI output. ' DVI Audio Input jacks (Digital Visual Interface) Connect to the digital audio output jacks for device with DVI output. 8